SMC Networks SMCBR24Q Button in the Soho Mode, If no configuration in the QoS page by the UI

Page 93

SMCBR24Q User Manual

Q-button in the SOHO Mode

The Q-button is a user friendly design. It provides a basic bandwidth management method. The end user can enjoy smooth Internet applications without any hassles with just one push.

Q-button, Q-button LED and Q-button icon

The Q-button is on the front panel with an LED above the button and an icon in the upper right corner of the UI indicating its current status. The default is off. When the Q-button is off (shown in Fig. 2), the green LED is off and the icon is grayed out. When the Q-button is on (shown in Fig. 2), the green LED is on and the icon turns yellow.

Fig. 1: Q-button off

Fig. 2: Q-button on

If no configuration in the QoS page by the UI:

When the button is pushed on without any configurations in the QoS page, the router distributes the available bandwidth provided by the ISP evenly to the min. rate of bandwidth of each PC on the LAN. The max. rate of each PC is 100% of the available bandwidth provided by the ISP.

If any configuration in the QoS page by the UI:

Any QoS configurations will make the Q-button a hot key. The end user can set the bandwidth management in the QoS page with the Q-button pushed off in advance. Once the Q-button is on, the pre-settings will be enabled. The end user can also set the bandwidth management with the Q-button pushed on.

Note: bandwidth management settings will only work with the Q-button pushed on.

Page 93

Image 93

Contents Page Table of Contents Dhcp Introduction Main features Reset Button Feature ListLED Status ButtonLogin ModeSite Map System Information System SummaryUser Bandwidth User UsageISP Bandwidth Network Basic SetupStatic IP Obtain an IP automaticallyEnter your Username and Password Password Old Password New PasswordConfirm New Password Time AutomaticallyManual MAC Clone Page On-Line Scheduler Remote Internet PassportWeb Site Hit Rate Application Usage Page Performance Optimization Please refer to Q-button-Home Mode To create a new application Web Site Block List Block ListApplication Block List DMZ Host Advanced SetupPort Range Forwarding ForwardingPort Triggering UPnP Ddns Advanced Routing Static Routing Dynamic RoutingVPN Pass Through IPSec Pass Through Remote ManagementPptp Pass Through L2TP Pass ThroughDiagnostics System ManagementDNS Name Lookup Ping Factory DefaultImport Configuration File Firmware UpgradeLog Export Configuration FileThere are four buttons follow the setup section When system alert, send log immediatelySyslog MailPage Button, Q-button LED and Q-button icon Button in the Home ModePage How to Manage SMCBR24Q Soho Mode Site Map Serial Number ConfigurationSystem up time Firmware versionNetwork Setting Status Log Setting Status Firewall Setting StatusNetwork SetupWAN Connection Type Enter your Username and Password Re-enter the password for confirmation Administrator Inactivity Time-out DMZ Host Forwarding Port Range Forwarding Port Triggering UPnP Ddns Advanced Routing Dynamic Routing Page Dhcp SetupPage Wins Server Dynamic IPStatus SecurityFirewall DoS Denial of ServiceSPI Stateful Packet Inspection Block WAN RequestRemote Management Access RulesMulticast Pass Through MTU Maximum Transmission UnitAdd a new Policy Services ServiceAction Source IP SchedulingDestination IP Apply this rule time parameterContent Filter Forbidden DomainsOn the Forbidden Domains list Apply this rule SchedulingVPN Pass Through When Fail Network Service DetectionSystem Management Dual WANNetwork Service Detection When Fail Protocol Binding BandwidthRate Control QoSRate Control Summary PriorityDiagnostic DNS Name Lookup Page Factory Default Firmware Download Firmware UpgradeSetting Backup System Log Log Setting Alert LogGeneral Log Page System Statistics Button in the Soho Mode If no configuration in the QoS page by the UIIf any configuration in the QoS page by the UI