SMC Networks SMCBR24Q user manual Network Setting Status

Page 48

SMCBR24Q User Manual

Network Setting Status

LAN IP: It shows the current IP Address of the Router, as seen by internal users on the Internet, and hyperlinks to LAN Setting in Setup page.

WAN1/2 IP: It shows the current WAN1 IP Address of the Router, as seen by external users on the Internet and hyperlinks to WAN Connection type in Setup page. When users select Obtain an IP automatically and it shows two buttons, release and renew. Users can click the release button to release the current IP address and click renew button to update the DHCP Lease Time or to get a new IP address. When users select PPPoE or PPTP, and it shows Connect / Disconnect.

Mode: It shows the Working Mode (Gateway or Router) and hyperlinks to Dynamic Routing in Setup page.

DNS: It shows all DNS Server Addresses and hyperlinks to WAN Connection Type in Setup page.

DDNS: It shows the status (Enable / Disable) and hyperlinks to DDNS in Setup page.

DMZ Host: It shows DMZ Private Address and hyperlinks to DMZ Host in Setup page. The default is

disabled.

Page 48

Image 48

Contents Page Table of Contents Dhcp Introduction Main features Feature List Reset ButtonLED Status ButtonLogin ModeSite Map System Summary System InformationUser Usage User BandwidthISP Bandwidth Basic Setup NetworkObtain an IP automatically Static IPEnter your Username and Password Password Old Password New PasswordConfirm New Password Time AutomaticallyManual MAC Clone Page Remote Internet Passport On-Line SchedulerWeb Site Hit Rate Application Usage Page Performance Optimization Please refer to Q-button-Home Mode To create a new application Block List Web Site Block ListApplication Block List Advanced Setup DMZ HostForwarding Port Range ForwardingPort Triggering UPnP Ddns Advanced Routing Dynamic Routing Static RoutingVPN Pass Through Remote Management IPSec Pass ThroughPptp Pass Through L2TP Pass ThroughDiagnostics System ManagementDNS Name Lookup Factory Default PingFirmware Upgrade Import Configuration FileExport Configuration File LogWhen system alert, send log immediately There are four buttons follow the setup sectionSyslog MailPage Button in the Home Mode Button, Q-button LED and Q-button iconPage How to Manage SMCBR24Q Soho Mode Site Map Configuration Serial NumberSystem up time Firmware versionNetwork Setting Status Firewall Setting Status Log Setting StatusSetup NetworkWAN Connection Type Enter your Username and Password Re-enter the password for confirmation Administrator Inactivity Time-out DMZ Host Forwarding Port Range Forwarding Port Triggering UPnP Ddns Advanced Routing Dynamic Routing Page Setup DhcpPage Dynamic IP Wins ServerSecurity StatusDoS Denial of Service FirewallSPI Stateful Packet Inspection Block WAN RequestAccess Rules Remote ManagementMulticast Pass Through MTU Maximum Transmission UnitAdd a new Policy Services ServiceAction Scheduling Source IPDestination IP Apply this rule time parameterContent Filter Forbidden DomainsOn the Forbidden Domains list Scheduling Apply this ruleVPN Pass Through Network Service Detection When FailSystem Management Dual WANNetwork Service Detection When Fail Bandwidth Protocol BindingQoS Rate ControlRate Control Priority SummaryDiagnostic DNS Name Lookup Page Factory Default Firmware Upgrade Firmware DownloadSetting Backup System Log Log Setting Alert LogGeneral Log Page System Statistics Button in the Soho Mode If no configuration in the QoS page by the UIIf any configuration in the QoS page by the UI