Seagate ST936751FC manual Relative humidity, Effective altitude sea level, Shock and vibration

Page 39

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

HDA Temp.

Check Point

Figure 10. Locations of the HDA temperature check point

6.4.2Relative humidity

The values below assume that no condensation on the drive occurs.

a.Operating

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

b.Non-operating

5% to 95% non-condensing relative humidity.

6.4.3Effective altitude (sea level)

a.Operating

–200 to +10,000 feet (–60.96 to +3,048 meters)

b.Non-operating

–200 to +40,000 feet (–60.96 to +12,210 meters)

6.4.4Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 11, and in accordance with the restrictions of Section 8.3.

6.4.4.1Shock

a.Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding 15 Gs at a maximum duration of 11 msec (half sinewave). The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding 20 Gs at a maximum duration of 2 msec (half sinewave). Shock may be applied in the X, Y, or Z axis.

b.Operating—abnormal

Equipment, as installed for normal operation, does not incur physical damage while subjected to intermit- tent shock not exceeding 40 Gs at a maximum duration of 11 msec (half sinewave). Shock occurring at

Savvio 15K.1 FC Product Manual, Rev. B

31

Image 39

Contents ST973451FC ST936751FC Savvio 15K.1 FCPage Contents Interface requirements Physical/electrical specificationsDefect and error management InstallationSeagate Technology support services Savvio 15K.1 FC Product Manual, Rev. B List of Figures Page Savvio 15K.1 family disc drive ScopeSavvio 15K.1 FC Product Manual, Rev. B Electromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityEuropean Union Restriction of Hazardous Substances RoHS Ncits TR-19 Reference documentsSavvio 15K.1 FC Product Manual, Rev. B General description Standard features Formatted capacities Media descriptionPerformance ReliabilityFactory-installed accessories OptionsProgrammable drive capacity Access time Performance characteristicsInternal drive characteristics Seek performance characteristicsFormat command execution time General performance characteristicsStart/stop time Prefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Reliability specifications Error ratesRecoverable Errors Interface errors Reliability and serviceUnrecoverable Errors Seek errorsHot plugging the drive 4 S.M.A.R.TControlling S.M.A.R.T Predictive failures Performance impactReporting control Determining rateDST failure definition Temperature Log Page 0DhParameter Code Description Drive Self Test DSTShort and extended tests State of the drive prior to testingImplementation Invoking DSTShipping Product warrantyLog page entries AbortProduct repair and return information Physical/electrical specifications AC power requirementsDC power requirements General DC power requirement notes +5V +12V Power sequencingConducted noise immunity Current profilesTypical ST936751FC drive +12V and +5V current profiles Power dissipation CURRENT/POWER vs Throughput FC 1GB Random 8 Block ReadsST973451FC CURRENT/POWER vs Throughput FC 4GB Random 8 Block Reads ST936751FC FC CURRENT/POWER vs Throughput FC 1GB Random 8 Block ReadsTemperature FC CURRENT/POWER vs Throughput FC 4GB Random 8 Block ReadsEnvironmental limits Shock Relative humidityEffective altitude sea level Shock and vibrationPackage size Packaged/product weight Drop height Recommended mounting Air cleanliness VibrationCorrosive environment Acoustics Drive dimensions inches Mechanical specificationsDefect and error management Drive internal defects/errorsDrive error recovery procedures FC-AL system errors Background Media Scan Media Pre-ScanDeferred Auto-Reallocation Idle Read After Write Installation Drive orientationCooling Grounding Drive mountingInterface requirements FC-AL featuresFibre Channel link service frames Link services supported Type of frameTask name Supported Fibre Channel task management functionsFibre Channel task management responses Fibre Channel Scsi FCP task management functionsNPort login Plogi payload Bytes Fibre Channel port loginProcess Login Plri payload Fibre Channel port login acceptFibre Channel Process Login NPort Login Accept ACC payload BytesFabric Login Flogi payload Bytes Fibre Channel Process Login AcceptFibre Channel fabric login Process Login Accept ACC payload BytesFabric Login Accept ACC payload Bytes Fibre Channel fabric accept loginOption Supported Dual port supportFibre Channel Arbitrated Loop options FC-AL options supportedSupported commands Command code Command name Scsi commands supportedDisconnect/reconnect control page 02h Savvio 15K.1 FC Product Manual, Rev. B LBdata Supported commands Command code Supported 4 Command name Savvio inquiry data Bytes Data hex Inquiry dataMiscellaneous status Miscellaneous operating features and conditionsMiscellaneous features Supported Feature or conditionPhysical characteristics FC-AL physical interfacePhysical description Connector requirements Part description Positions Part number FeaturesElectrical description FC-SCA pin descriptions Pin Signal name Signal type Pin Signal name Signal typePin descriptions Power Fault LED OutFC-AL transmitters and receivers Enable port bypass signals Active LED OutMotor start controls 11 SEL6 through SEL0 ID lines Parallel Enclosure Services Interface ESISetting Arbitrated loop physical address Alpa valuesHex Dec Signal characteristics TTL input characteristicsDevice control codes Differential Pecl input Differential Pecl outputSavvio 15K.1 FC Product Manual, Rev. B Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Numerics IndexFAN Page Plogi SEL ID See also cooling