Seagate ST973402SS, ST9146802SS manual Receiver characteristics, ISI loss example at 1.5 Gbps

Page 80

Figure 21 shows an ISI loss example at 1.5 Gbps.

S21 (dB)

 

 

Compliance interconnect magnitude response and ISI

0

loss example for 1.5 Gbps

ISI loss > 2.0 dB

-5.4 dB

Sample compliance interconnect

Frequency (GHz)

0.15

0.75

1.5

Figure 21. ISI loss example at 1.5 Gbps

9.5.2.5Receiver characteristics

The drive receiver is A.C. coupled. The receive network terminates the TxRx connection by a 100 ohm equiva- lent impedance as specified in table 31.

The receiver operates within a BER of 10-12when a SAS signal with valid voltage and timing characteristics is delivered to the compliance point from a 100 ohm source. The received SAS signal are considered valid if it meets the voltage and timing limits specified in table 28.

Additionally the receiver operates within the BER objective when the signal at a receiving phy has the addi- tional sinusoidal jitter present that is specified in table 30 and the common mode signal VCM over frequency range FCM as specified in table 26. The jitter tolerance is shown in Figure 17 for all Rx compliance points in a TxRx connection. The figure given assumes that any external interference occurs prior to the point at which the test is applied. When testing the jitter tolerance capability of a receiver, the additional 0.1 UI of sinusoidal jitter may be reduced by an amount proportional to the actual externally induced interference between the applica- tion point of the test and the input to the receiving phy. The additional jitter reduces the eye opening in both voltage and time.

70

Savvio 10K.2 SAS Product Manual, Rev. B

Page 79 Page 81
Image 80
Page 79 Page 81
Contents Savvio 10K.2 SAS Page Savvio 10K.2 SAS Page Revision status summary sheet Revision DatePage Contents Defect and error management InstallationSeagate Technology support services Interface requirementsList of Figures Savvio 10K.2 SAS disc drivePage Scope Savvio 10K.2 SAS disc driveSavvio 10K.2 SAS Product Manual, Rev. B Applicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean MICReference documents European Union Restriction of Hazardous Substances RoHSSavvio 10K.2 SAS Product Manual, Rev. B General description Performance Standard featuresMedia description Factory-installed accessories ReliabilityFormatted capacities Programmable drive capacityFactory-installed options Performance characteristics Internal drive characteristicsSeek performance characteristics Access timeFormat command execution time for 512-byte sectors minutes General performance characteristicsCache operation Start/stop timePrefetch/multi-segmented cache control Caching write data Prefetch operationPage Savvio 10K.2 SAS Product Manual, Rev. B Reliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Seek errorsInterface errors Preventive maintenance4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact MillisecondsReporting control Determining ratePredictive failures Thermal monitorTemperature Log Page 0Dh Parameter Code Description Drive Self Test DSTDST failure definition ImplementationState of the drive prior to testing Invoking DSTShort and extended tests Short test Function Code 001bProduct warranty Log page entriesAbort ShippingProduct repair and return information Physical/electrical specifications AC power requirementsDC power requirements ST9146802SS DC power requirementsST973402SS Gbit mode Amps ST973402SS DC power requirementsGeneral DC power requirement notes Power sequencing Conducted noise immunityCurrent profiles +5V +12VST973402SS current profile ST973402SS in 3 Gbit operation Power dissipationST9146802SS in 3 Gbit operation Temperature Environmental limitsRelative humidity Effective altitude sea levelShock and vibration ShockPackage size Packaged/product weight Drop height Recommended mountingCorrosive environment Air cleanlinessVibration Acoustics Mechanical specifications Mounting configuration dimensionsSavvio 10K.2 SAS Product Manual, Rev. B Drive error recovery procedures Defect and error managementDrive internal defects/errors Page SAS system errors Background Media ScanIdle Read After Write Media Pre-ScanDeferred Auto-Reallocation Installation Drive orientationCooling Air flowDrive mounting GroundingSavvio 10K.2 SAS Product Manual, Rev. B SAS features Interface requirementsDual port support Command name Command code Supported Scsi commands supportedCommands supported by Savvio SAS family drive Commands supported by Savvio SAS family drive Commands supported by Savvio SAS family drive Commands supported by Savvio SAS family drive Mode Sense data Inquiry dataSavvio inquiry data Bytes Data hexPage Mode Data Header 08 8b b9 98 00 00 02 Miscellaneous operating features and conditions Miscellaneous featuresSupported Feature or condition Miscellaneous statusSAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsSignal characteristics PowerSAS transmitters and receivers Ready LED OutLED drive signal Differential signalsGeneral interface characteristics Eye masks Eye masks overviewReceive eye mask Jitter tolerance masksPeak-to SinusoidalJitter Frequency in kHzTransmitter signal characteristics Signal characteristica Units GbpsReceiver signal characteristics Signal characteristic Units GbpsMaximum allowable jitter Gbps m, n Deterministic jitterqImpedance specifications Receiver jitter toleranceCompliant jitter test pattern Cjtpat Impedance requirements Sheet 1Electrical TxRx connections Transmitter characteristicsImpedance requirements Sheet 2 = -5,437dB Tctf Receiver characteristics ISI loss example at 1.5 GbpsSeagate Technology support services Warranty ServiceInternet MySeagate Spp.seagate.com Presales SupportData Recovery Services Authorized Service Centers Data Recovery ServicesToll-free support numbers FAX services-All Europe toll callCall center Presales and Technical Support Warranty Service Seagate Service Centers Index NumericsPage SAS See also cooling Page Seagate Technology LLC
Related manuals
Manual 84 pages 36.64 Kb

ST973402SS, ST9146802SS specifications

The Seagate ST973402SS and ST9146802SS are high-performance, enterprise-grade hard drives designed to meet the demanding needs of data-intensive applications. These drives are part of Seagate's Savvio and Barracuda product lines, aimed specifically at businesses and institutions requiring reliability, speed, and efficiency in storage solutions.

The ST973402SS is a 73GB, 2.5-inch hard drive, while the ST9146802SS offers a larger capacity of 146GB. Both models utilize a 10,000 RPM spindle speed, which significantly enhances their ability to handle fast data read and write operations. This speed ensures reduced latency and improved overall performance, making them ideal for environments where rapid access to data is crucial.

One of the standout features of these drives is their support for Serial Attached SCSI (SAS) interface. SAS technology provides a point-to-point connection, which allows for increased data transfer rates compared to traditional SATA drives. The ST973402SS and ST9146802SS are capable of transferring data at speeds of up to 600 MB/s, facilitating efficient data transfers in enterprise systems.

In terms of reliability, both models offer advanced features designed to improve data integrity and durability. They are built to withstand high workloads, with an annualized workload rate of up to 550 TB per year. This makes them well-suited for applications like databases and transactional storage, where sustained performance is required. Additionally, the drives feature Seagate’s PowerFit technology, which optimizes performance while minimizing power consumption.

To enhance data security, the drives come equipped with self-encrypting technology, ensuring that sensitive data is protected through hardware-based encryption. This is particularly important in environments where data breaches can lead to significant operational impacts.

The drives are also designed to operate efficiently in terms of thermal management, featuring robust heat dissipation capabilities. This helps to maintain optimal performance levels while prolonging the lifespan of the drives.

Overall, the Seagate ST973402SS and ST9146802SS are robust and reliable hard drives that cater to the needs of enterprise environments, combining high capacity, exceptional speed, advanced security features, and energy efficiency to help businesses maintain and manage large volumes of data effectively. With their proven performance and innovative technologies, these drives are well-equipped to support a wide range of applications in modern data centers.
Top Page Image Contents