Seagate ST9600204SS Physical characteristics, Connector requirements, Electrical description

Page 72

12.4.2Physical characteristics

This section defines physical interface connector.

12.4.3Connector requirements

Contact your preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in a future revision of this publication when production parts are available from major connec- tor manufacturers.

The SAS device connector is illustrated in Figures 30 and 31.

12.4.4Electrical description

SAS drives use the device connector for:

•DC power

•SAS interface

•Activity LED

This connector is designed to either plug directly into a backpanel or accept cables.

12.4.5Pin descriptions

This section provides a pin-out of the SAS device and a description of the functions provided by the pins.

Table 13: SAS pin descriptions

Pin	Signal name	Signal type


S1	Port A Ground
S2*	+Port A_in	Diff. input pair

S3*	-Port A_in
S4	Port A Ground

S5*	-Port A_out	Diff output pair
S6*	+Port A_out

S7	Port A Ground
S8	Port B Ground

S9*	+Port B_in	Diff. input pair
S10*	-Port B_in

S11	Port A Ground
S12*	-Port B_out	Diff output pair

S13*	+Port B_out
S14	Port B Ground

*- Short pin to support hot plugging NC - No connection in the drive.

Pin	Signal name	Signal type


P1*	NC (reserved 3.3Volts)
P2*	NC (reserved 3.3Volts)

P3	NC (reserved 3.3Volts)
P4	Ground

P5	Ground
P6	Ground

P7	5 Volts charge
P8*	5 Volts

P9*	5 Volts
P10	Ground

P11*	Ready LED	Open collector out
P12	Ground

P13	12 Volts charge
P14*	12 Volts

P15*	12 Volts

64	Savvio 10K.4 SAS Product Manual, Rev. E

Image 72

Contents ST9600204SSST9600104SS ST9450404SSST9450304SS ST9600004SS ST9450204SSStandard Models Self-Encrypting Drive Models SED Fips 140-2 ModelsRevision history Contents Defect and error management InstallationAbout Fips About self-encrypting drives Interface requirementsPage Savvio 10K.4 SAS Product Manual, Rev. E List of Figures Page Seagate Technology support services Seagate Online Support and ServicesScope Applicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean KCCReference documents European Union Restriction of Hazardous Substances RoHSGeneral description Standard features Media descriptionPerformance ReliabilityFormatted capacities Programmable drive capacityFactory-installed options Performance characteristics Internal drive characteristicsSeek performance characteristics Access timeGeneral performance characteristics Start/stop timePrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Reliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Seek errorsInterface errors Preventive maintenance4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlTemperature Log Page 0Dh Parameter Code Description Predictive failuresThermal monitor State of the drive prior to testing Drive Self Test DSTDST failure definition ImplementationShort and extended tests Short test Function Code 001bExtended test Function Code 010b Log page entriesProduct warranty ShippingProduct repair and return information Physical/electrical specifications PowerChoiceTM power managementPowerChoice modes AC power requirements DC power requirementsPage 450GB standard model DC power requirements 0Gb mode Amps General DC power requirement notes Power sequencingConducted noise immunity Current profiles Current profiles for 600GB modelsCurrent profiles for 450GB models Power dissipation GB models in 3Gb operation600GB models in 6Gb operation 450GB models in 3Gb operation Temperature a. Operating Environmental limits450GB models in 6Gb operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Shock Recommended mounting Air cleanliness Vibration a. Operating-normalCorrosive environment Acoustics Mechanical specifications Mounting configuration dimensionsAbout Fips PurposeLevel 2 security Controlled access Admin SPAbout self-encrypting drives Data encryptionDefault password Random number generator RNGDrive locking Data bandsAuthenticated firmware download Power requirementsSupported commands Cryptographic eraseDefect and error management Drive internal defects/errorsDrive error recovery procedures SAS system errors Background Media Scan Media Pre-ScanDeferred Auto-Reallocation Setting and determining the current Type Level Idle Read After WriteProtection Information PI Levels of PIIdentifying a Protection Information drive Installation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Supported commandsSupported commands Supported commands Supported commands Mode Sense data Inquiry dataSavvio inquiry data Page Mode Sense data for 600GB drives Mode PagesMode Sense values for 450GB drives Miscellaneous operating features and conditions Miscellaneous featuresMiscellaneous status SAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsSignal characteristics PowerSAS transmitters and receivers Ready LED OutSAS-2 Specification compliance LED drive signalDifferential signals General interface characteristicsIndex NumericsKCC Msid Mtbf See also cooling Page Savvio 10K.4 SAS Product Manual, Rev. E Page Seagate Technology LLC

Related manuals

Manual 82 pages 32.11 Kb