Seagate ST94011A, ST94811A, ST92811A, ST92011A Korean RRL, Australian C-Tick N176, FCC verification

Page 21

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

EUT name (model numbers): ST94011A. ST92011A, ST94811A and ST92811A

Certificate numbers:

ST94011AE-H011-03-1191(B)

ST92011AE-H011-03-1192(B)

ST94811AE-H011-03-1189(B)

ST92811AE-H011-03-1190(B)

Trade name or applicant: Seagate Technology

Manufacturing date: April 2003

Manufacturer/nationality: USA, Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.14.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

Reorient the receiving antenna.

Move the device to one side or the other of the radio or TV.

Move the device farther away from the radio or TV.

Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

Momentus 5400.1 Product Manual, Rev. F

15

Image 21
Contents ST94011A ST94811A ST92011A ST92811A MomentusPage Contents Momentus 5400.1 Product Manual, Rev. F List of Figures Momentus 5400.1 Product Manual, Rev. F Momentus 5400.1 disc drive IntroductionMomentus 5400.1 Product Manual, Rev. F Specification summary Drive specificationsSpecifications Drive specification ST94011A ST94811A ST92011A ST92811ASpecifications LBA mode Default logical geometryFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Time to ready Seek timeTypical seek times msec Read Write Time to ready Typical MaxPower specifications Typical current profile Conducted noiseVoltage tolerance Power management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityMeasurement type Specification Safety certificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Page Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mountingConnector signals ATA interface signals and connector pinsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features command4 S.M.A.R.T. commands Supported S.M.A.R.T. commandsCode in features register A.R.T. command Momentus 5400.1 Product Manual, Rev. F Compatibility summary Installation considerationsSystem Compatibility Tested systemsTested Bios versions Bios versions testedOperating system versions tested Operating systems testedSoftware utilities Compatibility test configurationsOther certification Vendor ApplicationMomentus 5400.1 Product Manual, Rev. F Internet Seagate Technology support servicesPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage Page Momentus 5400.1 Product Manual, Rev. F Page Seagate Technology LLC
Related manuals
Manual 2 pages 44.41 Kb