Seagate ST94011A manual Compatibility test configurations, Software utilities, Other certification

Page 37

5.4Compatibility test configurations

The Momentus drives have been tested to demonstrate compliance with ATA/ATAPI-6 in both the master drive and slave drive positions. These tests were preformed to ensure the functionality to ATA/ATAPI-6 specifications and the compatibility of Seagate Momentus drives with other ATA/ATAPI-6 compliant peripherals.

5.5Software utilities

The following is a brief overview of a some of the Seagate utilities used during the Seagate competitive analy- sis process.

The Seagate SeaTools application is an exclusive disc drive diagnostic software designed to troubleshoot most hard drive issues. Desktop edition works with most ATA, SATA, or SCSI drives in desktop systems and has a 98 percent accuracy rate.

The Seagate DiscWizard™ application simplifies the installation of disc drives. This software also overcomes many system BIOS and operating system limitations that can complicate the installation of higher-capacity ATA (IDE) interface drives.

This is a list of some of the third party utilities used in the testing process.

Vendor	Application

AMI	Diagnostic

Apple	Macbench

Intel	PCI-EXE

Microsoft	Winbench99

Symantec	Norton Utilities

5.6Other certification

Microsoft software compatibility.

Momentus 5400.1 Product Manual, Rev. F

31

Image 37

Contents ST94011A ST94811A ST92011A ST92811A MomentusPage Contents Momentus 5400.1 Product Manual, Rev. F List of Figures Momentus 5400.1 Product Manual, Rev. F Momentus 5400.1 disc drive IntroductionMomentus 5400.1 Product Manual, Rev. F Specification summary Drive specificationsSpecifications Drive specification ST94011A ST94811A ST92011A ST92811ASpecifications LBA mode Default logical geometryFormatted capacity Physical organizationTechnology Specification Physical characteristicsRecording and interface technology Time to ready Seek timeTypical seek times msec Read Write Time to ready Typical MaxPower specifications Conducted noise Typical current profileVoltage tolerance Power management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityMeasurement type Specification Safety certificationReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Page Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mountingConnector signals ATA interface signals and connector pinsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandSupported S.M.A.R.T. commands 4 S.M.A.R.T. commandsCode in features register A.R.T. command Momentus 5400.1 Product Manual, Rev. F Compatibility summary Installation considerationsSystem Compatibility Tested systemsTested Bios versions Bios versions testedOperating system versions tested Operating systems testedSoftware utilities Compatibility test configurationsOther certification Vendor ApplicationMomentus 5400.1 Product Manual, Rev. F Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage Page Momentus 5400.1 Product Manual, Rev. F Page Seagate Technology LLC

Related manuals

Manual 2 pages 44.41 Kb