Seagate ST92811A, ST94811A, ST94011A, ST92011A manual

Page 2

©2004-2007, Seagate Technology LLC All rights reserved. Publication number: 100271716, Rev. F

August 2007

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus, Seagate- SeaBOARD, SeaFONE, SeaTDD, and SeaTools are either trademarks or registered trade- marks of Seagate Technology LLC or one of its affiliated companies in the United States and/ or other countries. All other trademarks or registered trademarks are the property of their respective owners.

One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative purposes. Actual quantities will vary based on various factors, including file size, file format, features and application software. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2

Contents Momentus ST94011A ST94811A ST92011A ST92811APage Contents Momentus 5400.1 Product Manual, Rev. F List of Figures Momentus 5400.1 Product Manual, Rev. F Introduction Momentus 5400.1 disc driveMomentus 5400.1 Product Manual, Rev. F Specifications Drive specificationsSpecification summary Drive specification ST94011A ST94811A ST92011A ST92811ASpecifications Formatted capacity Default logical geometryLBA mode Physical organizationRecording and interface technology Physical characteristicsTechnology Specification Typical seek times msec Read Write Seek timeTime to ready Time to ready Typical MaxPower specifications Voltage tolerance Typical current profileConducted noise Active mode Power-management modesPower management modes Idle modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationDrive level acoustics AcousticsElectromagnetic immunity Electromagnetic immunityReliability Safety certificationMeasurement type Specification Agency certificationFCC verification Korean RRLAustralian C-Tick N176 Page Jumper settings Configuring and mounting the driveHandling and static discharge precautions Master/slave configurationDrive mounting Cable-select optionConnector Cable Signal Name Contact Conductor ATA interface signals and connector pinsConnector signals Cable Connector Conductor Contact Signal NameCommand name Command code in hex ATA-standard commands Supported ATA commandsSupported commands ATA-standard security commands Command name Command code in hexATA-standard power-management commands Supported commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Features register valuesCode in features register A.R.T. command 4 S.M.A.R.T. commandsSupported S.M.A.R.T. commands Momentus 5400.1 Product Manual, Rev. F System Compatibility Installation considerationsCompatibility summary Tested systemsOperating system versions tested Bios versions testedTested Bios versions Operating systems testedOther certification Compatibility test configurationsSoftware utilities Vendor ApplicationMomentus 5400.1 Product Manual, Rev. F Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index NumericsPage Page Momentus 5400.1 Product Manual, Rev. F Page Seagate Technology LLC

Related manuals

Manual 2 pages 44.41 Kb