Seagate ST950011FS, ST9200011FS, ST9100011FS manual Physical characteristics, Performance

Page 12

2.4.3

Performance

 

 

 

 

 

 

 

 

 

 

 

 

Notes

200GB

100GB

50GB

 

 

 

 

 

Maximum Burst Transfer Rate

 

300MB/s

 

 

 

 

 

 

 

Peak sequential 128KB read/write data transfer rate (MB/s max)

[1]

240/220

 

 

 

 

 

 

 

Sustained sequential 128KB read/write data transfer rate (MB/s)

[2]

200/100

200/60

200/30

 

 

 

 

 

Peak 4KB random read/write command rate (IOPs)

[3]

30,000/25,000

 

 

 

 

 

 

 

Sustained 4KB random read/write command rate (IOPs)

[4]

25,000/5200

 

25,000/2600

 

 

 

 

 

Sustainable 4KB Random combined IOPS for 5 year Endurance

[5]

10,500

 

 

(65%/35% R/W, 70% Duty Cycle)

 

 

 

 

[1]Testing performed at Queue Depth = 32, Sequentially Preconditioned drive, using IOMeter 2008.6.28.

[2]Testing performed at Queue Depth = 32, Sequentially Preconditioned drive, using IOMeter 2006.7.27.

[3]Testing performed at Queue Depth = 32, Randomly Preconditioned drive, using IOMeter 2008.6.28.

[4]Testing performed at Queue Depth = 32, Randomly Preconditioned drive, using IOMeter 2006.7.27.

[5]Testing performed at Queue Depth = 32, Non-Preconditioned drive, using IOMeter 2006.7.27.

Note. IOMeter is available at http://www.iometer.org/ or http://sourceforge.net/projects/iometer/.

IOMeter is licensed under the Intel Open Source License and the GNU General Public License. Intel does not endorse any IOMeter results.

Peak performance is defined as the typical best case performance that the product will be able to achieve when the product is preconditioned as mentioned and host commands are aligned on 4KB boundaries.

Sustained performance is defined as the typical worst case performance that the product will be able to achieve when the product is preconditioned as mentioned and host commands are aligned on 4KB boundar- ies. Write values also take into account the worst case performance throttling that may occur to ensure the product meets specified reliability specifications.

Due to the nature of Flash memory technologies there are many factors that can result in values different than those stated in this specification. Some discrepancies can be caused by bandwidth limitations in the host adapter, operating system, or driver limitations. It is not the intent of this manual to cover all possible causes of performance discrepancies.

When evaluating performance of SSD devices, it is recommended to measure performance of the device in a method that resembles the targeted application using real world data and workloads. Test time should also be adequately large to ensure that sustainable metrics and measures are obtained.

2.5Physical characteristics

Maximum height

Maximum width

Maximum length

Max weight

7.0mm (0.276 in)

70.1mm (2.76 in)

100.53mm (3.958 in)

135 g (0.298 lb)

6

Pulsar Product Manual, Rev. A

Image 12
Contents PulsarTM ST9200011FS ST9100011FS ST950011FSRevision history Revision DateContents Pulsar Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specifications summary for 200, 100 and 50 GB modelsPulsar Product Manual, Rev. a Default logical geometry for ATA based systems Formatted capacityPerformance, Recording and interface technology Physical characteristics PerformanceAccess time Typical access times µs Read WriteTime to Ready Power specifications 200GB DC power requirements 100GB DC power requirements 50GB DC power requirements Typical current profiles Conducted noiseVoltage tolerance Environmental specifications Electromagnetic immunity VibrationOperating vibration Nonoperating vibrationReliability specifications ReliabilityAgency certification Environmental protection ChassisCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingCooling Air flowSerial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex C6H Identify Device command Word Description ValueXxxxh Ffffh Description if bit is set to Bit Word Bit WordDevice supports Software Settings Preservation Media serial number is supported Write-Read-Verify feature set is supported Set Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Pulsar Product Manual, Rev. a Warranty Support Direct.seagate.com Spp.seagate.com WebTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Presales SupportIndex Page Page Pulsar Product Manual, Rev. a Page Disc Drive, Scotts Valley, California 95066-4544, USA