Seagate ST9200011FS, ST950011FS, ST9100011FS manual Agency certification

Page 22

2.12Agency certification

2.12.1Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

2.12.2Electromagnetic compatibility

Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electro- magnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the lev- els specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

Certificate number: STX-ST9200011FS (B)

Trade name or applicant: Seagate Technology LLC

Manufacturing date: February 23, 2010 (Date of Certification)

Manufacturer/nationality: USA, Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.12.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, drive, motherboard, power supply, etc.) does comply with the limits for a Class B comput- ing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

16

Pulsar Product Manual, Rev. A

Image 22
Contents PulsarTM ST9200011FS ST9100011FS ST950011FSRevision history Revision DateContents Pulsar Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specifications summary for 200, 100 and 50 GB modelsPulsar Product Manual, Rev. a Formatted capacity Default logical geometry for ATA based systemsPerformance, Recording and interface technology Physical characteristics PerformanceTypical access times µs Read Write Access timeTime to Ready Power specifications 200GB DC power requirements 100GB DC power requirements 50GB DC power requirements Conducted noise Typical current profilesVoltage tolerance Environmental specifications Operating vibration Electromagnetic immunityVibration Nonoperating vibrationReliability specifications ReliabilityAgency certification Environmental protection ChassisCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingCooling Air flowSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex C6H Identify Device command Word Description ValueXxxxh Ffffh Description if bit is set to Bit Word Bit WordDevice supports Software Settings Preservation Media serial number is supported Write-Read-Verify feature set is supported Set Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Pulsar Product Manual, Rev. a Warranty Support Direct.seagate.com Spp.seagate.com WebData Recovery Services Call Center Toll-free Direct dial Technical Support Warranty ServiceData Recovery Services Authorized Service Centers Presales SupportIndex Page Page Pulsar Product Manual, Rev. a Page Disc Drive, Scotts Valley, California 95066-4544, USA