Seagate ST3200827ACE, ST3120213ACE, ST3160212ACE, ST3250824ACE manual Revision status summary sheet

Page 2

Revision status summary sheet

Revision	Date	Notes
Rev. A	05/02/06	Initial release.
Rev. B	05/17/06	Revise AFR specification.
Rev. C	11/10/06	Revise DC power requirements Table 4.

Copyright © 2006 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100389999, Rev. C November 2006

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. DB35 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.

One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative purposes. Actual quantities will vary based on various factors, including file size, file format, features and application software. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2

Contents DB35 Series Revision status summary sheet Contents DB35 Series 7200.2 Product Manual, Rev. C List of Figures DB35 Series 7200.2 Product Manual, Rev. C Introduction DB35 Series 7200.2 Product Manual, Rev. C Drive specifications Specification summary tableDrive specifications for 500 and 400 Gbyte models Drive specification ST3500841ACE ST3400833ACEFollowing web Drive specifications for 300, 250, and 200 Gbyte models Drive specification ST3300822ACE ST3250824ACE ST3200827ACEDB35 Series 7200.2 Product Manual, Rev. C Drive specifications for 160, 120, and 80 Gbyte models Drive specification ST3160212ACE ST3120213ACE ST3802110ACEAccess the following web Formatted capacity Default logical geometryLBA mode Recording and interface technologyDB35 Series 7200.2 Product Manual, Rev. C Start/stop times Physical characteristicsSeek time Power specifications Voltage tolerance Typical current profileConducted noise Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Vibration AcousticsNonoperating shock Operating vibrationRadio frequency environments Electromagnetic immunityReliability Electromagnetic compatibility Safety certificationAgency certification Korean RRLEuropean Union Restriction of Hazardous Substances RoHS Environmental protectionFCC verification Corrosive environment DB35 Series 7200.2 Product Manual, Rev. C Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view DB35 Series 7200.2 Product Manual, Rev. C ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF6H Write Sectors Without Retries 31H Write Sectors Extended 34H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Set Features command 0CH4 S.M.A.R.T. commands Code in features Register A.R.T. commandDB35 Series 7200.2 Product Manual, Rev. C Internet MySeagate Spp.seagate.com Seagate Technology support servicesWarranty Service Presales SupportData Recovery Services Authorized Service Centers Data Recovery ServicesToll-free support numbers FAX services-All Europe toll callCall center Presales and Technical Support Warranty Service Asia/Pacific support services Publication feedback survey DB35 Series 7200.2 Product Manual, Rev. C Index NumericsPage Page DB35 Series 7200.2 Product Manual, Rev. C Page Seagate Technology LLC

Related manuals

Manual 52 pages 21.64 Kb