Seagate ST3250824ACE manual 4 S.M.A.R.T. commands, Code in features Register A.R.T. command

Page 43

4.1.4S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-7 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Code in features

 

register

S.M.A.R.T. command

D0H

S.M.A.R.T. Read Data

D1H

Vendor-specific

D2H

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

S.M.A.R.T. Save Attribute Values

D4H

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

S.M.A.R.T. Read Log Sector

D6H

S.M.A.R.T. Write Log Sector

D7H

Vendor-specific

D8H

S.M.A.R.T. Enable Operations

D9H

S.M.A.R.T. Disable Operations

DAH

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

DB35 Series 7200.2 Product Manual, Rev. C

37

Image 43
Contents DB35 Series Revision status summary sheet Contents DB35 Series 7200.2 Product Manual, Rev. C List of Figures DB35 Series 7200.2 Product Manual, Rev. C Introduction DB35 Series 7200.2 Product Manual, Rev. C Specification summary table Drive specificationsDrive specification ST3500841ACE ST3400833ACE Drive specifications for 500 and 400 Gbyte modelsFollowing web Drive specification ST3300822ACE ST3250824ACE ST3200827ACE Drive specifications for 300, 250, and 200 Gbyte modelsDB35 Series 7200.2 Product Manual, Rev. C Drive specification ST3160212ACE ST3120213ACE ST3802110ACE Drive specifications for 160, 120, and 80 Gbyte modelsAccess the following web Recording and interface technology Default logical geometryLBA mode Formatted capacityDB35 Series 7200.2 Product Manual, Rev. C Seek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profileVoltage tolerance Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications Operating vibration AcousticsNonoperating shock VibrationReliability Electromagnetic immunityRadio frequency environments Korean RRL Safety certificationAgency certification Electromagnetic compatibilityFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment DB35 Series 7200.2 Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsCable-select option Jumper settingsMaster/slave configuration Drive as master with a non-ATA-compatible slaveUltra ATA/100 cable Drive mountingMounting dimensions-top, side and end view DB35 Series 7200.2 Product Manual, Rev. C ATA interface ATA interface signals and connector pinsCommand name Command code in hex Supported ATA commandsF6H Write Sectors Without Retries 31H Write Sectors Extended 34H Word Description Value Identify Device commandXx07H Description if bit is set to Bit Word 0CH Set Features commandCode in features Register A.R.T. command 4 S.M.A.R.T. commandsDB35 Series 7200.2 Product Manual, Rev. C Presales Support Seagate Technology support servicesWarranty Service Internet MySeagate Spp.seagate.comData Recovery Services Data Recovery Services Authorized Service CentersCall center Presales and Technical Support Warranty Service FAX services-All Europe toll callToll-free support numbers Asia/Pacific support services Publication feedback survey DB35 Series 7200.2 Product Manual, Rev. C Numerics IndexPage Page DB35 Series 7200.2 Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 52 pages 21.64 Kb