Seagate ST3160212ACE Agency certification, Safety certification, Electromagnetic compatibility

Page 25

2.13Agency certification

2.13.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.13.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•EUT name (model numbers): See table below.

•Certificate numbers:

Model

Certificate Number

 

 

ST3500841ACE

E-H011-05-3453 (B)

 

 

ST3400833ACE

E-H011-05-3453 (B)

 

 

ST3300822ACE

E-H011-05-3453 (B)

 

 

ST3250824ACE

E-H011-05-3453 (B)

 

 

ST3200827ACE

E-H011-05-3453 (B)

 

 

ST3160212ACE

E-H011-05-3453 (B)

 

 

ST3120213ACE

E-H011-05-3453 (B)

 

 

ST3802110ACE

E-H011-05-3453 (B)

 

 

•Trade name or applicant: Seagate Technology

•Manufacturing date: January 2006

•Manufacturer/nationality: Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

DB35 Series 7200.2 Product Manual, Rev. C

19

Page 24 Page 26
Image 25
Page 24 Page 26
Contents DB35 Series Revision status summary sheet Contents DB35 Series 7200.2 Product Manual, Rev. C List of Figures DB35 Series 7200.2 Product Manual, Rev. C Introduction DB35 Series 7200.2 Product Manual, Rev. C Specification summary table Drive specificationsDrive specification ST3500841ACE ST3400833ACE Drive specifications for 500 and 400 Gbyte modelsFollowing web Drive specification ST3300822ACE ST3250824ACE ST3200827ACE Drive specifications for 300, 250, and 200 Gbyte modelsDB35 Series 7200.2 Product Manual, Rev. C Drive specification ST3160212ACE ST3120213ACE ST3802110ACE Drive specifications for 160, 120, and 80 Gbyte modelsAccess the following web LBA mode Default logical geometryFormatted capacity Recording and interface technologyDB35 Series 7200.2 Product Manual, Rev. C Seek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profileVoltage tolerance Active mode Power-management modesIdle mode Sleep mode Environmental specifications Nonoperating shock AcousticsVibration Operating vibrationReliability Electromagnetic immunityRadio frequency environments Agency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment DB35 Series 7200.2 Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsMaster/slave configuration Jumper settingsDrive as master with a non-ATA-compatible slave Cable-select optionUltra ATA/100 cable Drive mountingMounting dimensions-top, side and end view DB35 Series 7200.2 Product Manual, Rev. C ATA interface ATA interface signals and connector pinsCommand name Command code in hex Supported ATA commandsF6H Write Sectors Without Retries 31H Write Sectors Extended 34H Word Description Value Identify Device commandXx07H Description if bit is set to Bit Word 0CH Set Features commandCode in features Register A.R.T. command 4 S.M.A.R.T. commandsDB35 Series 7200.2 Product Manual, Rev. C Warranty Service Seagate Technology support servicesInternet MySeagate Spp.seagate.com Presales SupportData Recovery Services Data Recovery Services Authorized Service CentersCall center Presales and Technical Support Warranty Service FAX services-All Europe toll callToll-free support numbers Asia/Pacific support services Publication feedback survey DB35 Series 7200.2 Product Manual, Rev. C Numerics IndexPage Page DB35 Series 7200.2 Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 52 pages 21.64 Kb
Top Page Image Contents