Seagate ST3400833ACE, ST3120213ACE, ST3160212ACE, ST3200827ACE manual Environmental specifications

Page 22

2.9Environmental specifications

2.9.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions for standard models. Recommended measurement locations are shown in See Figure 6 on page 27.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 44°C (112°F) at 10,000 feet (3,048 meters).

Operating:

0° to 60°C (32° to 140°F)

 

 

Nonoperating:

–40° to 70°C (–40° to 158°F)

 

 

2.9.2Temperature gradient

Operating:

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating:

30°C per hour (86°F per hour max)

 

 

2.9.3Humidity

2.9.3.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.9.3.2Wet bulb temperature

Operating:

37.7°C (99.9°F max)

 

 

Nonoperating:

40°C (104°F max)

 

 

2.9.4Altitude

Operating:

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

 

 

Nonoperating:

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

 

 

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

16

DB35 Series 7200.2 Product Manual, Rev. C

Image 22
Contents DB35 Series Revision status summary sheet Contents DB35 Series 7200.2 Product Manual, Rev. C List of Figures DB35 Series 7200.2 Product Manual, Rev. C Introduction DB35 Series 7200.2 Product Manual, Rev. C Drive specifications Specification summary tableDrive specifications for 500 and 400 Gbyte models Drive specification ST3500841ACE ST3400833ACEFollowing web Drive specifications for 300, 250, and 200 Gbyte models Drive specification ST3300822ACE ST3250824ACE ST3200827ACEDB35 Series 7200.2 Product Manual, Rev. C Drive specifications for 160, 120, and 80 Gbyte models Drive specification ST3160212ACE ST3120213ACE ST3802110ACEAccess the following web Formatted capacity Default logical geometryLBA mode Recording and interface technologyDB35 Series 7200.2 Product Manual, Rev. C Seek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profileVoltage tolerance Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Vibration AcousticsNonoperating shock Operating vibrationReliability Electromagnetic immunityRadio frequency environments Electromagnetic compatibility Safety certificationAgency certification Korean RRLFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment DB35 Series 7200.2 Product Manual, Rev. C Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view DB35 Series 7200.2 Product Manual, Rev. C ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF6H Write Sectors Without Retries 31H Write Sectors Extended 34H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Set Features command 0CH4 S.M.A.R.T. commands Code in features Register A.R.T. commandDB35 Series 7200.2 Product Manual, Rev. C Internet MySeagate Spp.seagate.com Seagate Technology support servicesWarranty Service Presales SupportData Recovery Services Authorized Service Centers Data Recovery ServicesCall center Presales and Technical Support Warranty Service FAX services-All Europe toll callToll-free support numbers Asia/Pacific support services Publication feedback survey DB35 Series 7200.2 Product Manual, Rev. C Index NumericsPage Page DB35 Series 7200.2 Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 52 pages 21.64 Kb