Seagate ST660712DE, ST610712DE, ST612712DEG, ST680712DEG manual Environmental specifications

Page 17

2.8Environmental specifications

2.8.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambient conditions. Case temperature of the drive operating at 60°C ambient may hit a maximum of 70°C at certain parts of the casing.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating	0° to 60°C (32° to 140°F)	(70°C max case temperature)

Nonoperating	–40° to 70°C (–40° to 158°F)

2.8.2Temperature gradient

Operating	20°C per hour (36°F per hour max), without condensation

Nonoperating	30°C per hour (54°F per hour max), without condensation

2.8.3Humidity

2.8.3.1Relative humidity

Operating	5% to 90% noncondensing (30% per hour max)

Nonoperating	5% to 95% noncondensing (30% per hour max)

2.8.3.2Wet bulb temperature

Operating	33°C	(91.4°F max) [1]

Nonoperating	40°C	(104°F max) [2]

[1]Operating: Wet bulb temperature is calculated by the operating Temperature and the Relative Humidity levels.

[2]Nonoperating: Wet bulb temperature is calculated by the nonoperating Temperature and the Relative Humidity levels.

2.8.4Altitude

Operating	–60.98 m to 3,048 m (–200 ft to 10,000+ ft)

Nonoperating	–60.98 to 12,192 m (–200 ft to 40,000+ ft)

ST1.3 Series Product Manual, Rev. C

11

Image 17

Contents Rev. C ST1.3 SeriesRevision status summary sheet Contents ST1.3 Series Product Manual, Rev. C List of Figures ST1.3 Series Product Manual, Rev. C Introduction ST1.3 Series IDE interface ZIF connector disc driveDrive care Handling precautionsDisclaimer Specifications Drive specificationsPower, access times and acoustics Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate LBA mode Default logical geometryFormatted capacity Model Cylinders Read/write heads Sectors per trackTechnology Specification Physical characteristicsRecording and interface technology Time to readyPower specifications Typical current profile DC powerVoltage tolerance Voltage tolerance including noise Conducted noiseActive mode Power-management modesPerformance idle mode Standby/Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationOperating random vibration Operating sweep sine vibrationOperating random vibration profile Nonoperating sweep sine vibrationCorrosive environment Nonoperating random vibrationNonoperating random vibration profile Electromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityReliability Measurement type SpecificationAgency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification China Restriction of Hazardous Substances RoHS DirectivePage ST1.3 Series Product Manual, Rev. C Series Proper Handling example Configuring and mounting the driveHandling and static discharge precautions Drive installation ST1.3 Series Product Manual, Rev. C ST1.3 Series Area for Protective Mounting Mounting considerationsInterface description Connector interface signals and connector pinsWay ZIF IDE interface connector signals Iord Supported ATA commands Supported commands Word ATA specification Value Identify Device commandXxA5H Description if bit is set to Bit Feature Description Set Features commandFeatures register values ST1.3 Series Product Manual, Rev. C Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Publication feedback survey ST1.3 Series Product Manual, Rev. C Index Page Page ST1.3 Series Product Manual, Rev. C Page Seagate Technology LLC