Seagate ST610712DE, ST680712DE, ST660712DE manual Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate

Page 10

Table 1:	Specifications

		ST612712DEG		ST610712DEG	ST680712DEG	ST660712DEG
Drive specification		ST612712DE		ST610712DE	ST680712DE	ST660712DE

Read/write power (typical 3.3V)		230/240 mA

Performance idle mode (typical 3.3V)		140 mA

Low power idle mode (typical 3.3V)		77 mA

Standby/Sleep mode (typical 3.3V)		13 mA

Voltage tolerance (including noise)		3.3V ± 5%

Ambient temperature		0° to 60°C (operating)
		–40° to 70°C (nonoperating)

Temperature gradient (°C per hour max)		20°C (operating)
		30°C (nonoperating)
Relative humidity (noncondensing)		5% to 90% (operating)
		5% to 95% (nonoperating)

Relative humidity gradient		30% per hour max

Wet bulb temperature (°C max)		33°C (operating)
		40°C (nonoperating)
Altitude, operating		–60.98 m to 3,048 m (–200 ft to 10,000+ ft)

Altitude, nonoperating (below mean sea level, max)		–60.98 m to 12,192 m (–200 ft to 40,000+ ft)

Shock, operating (Gs max at 1 msec)		300

Shock, nonoperating (Gs max at 1 msec)		2000

Vibration, operating		1.0 Gs (0 to peak, 10–500 Hz) @ 2 oct/min sweep rate
(max displacement may apply below 10 hz)

Vibration, nonoperating		5.0 Gs (0 to peak, 10–500 Hz) @ 0.5 oct/min sweep rate
(max displacement may apply below 22 hz)
Drive acoustics, sound power (bels)
Idle (typical / max)		1.6/ 1.9
Operational (typical / max)		1.7 / 2.0
Nonrecoverable read errors		1 per 1014 bits read
Load/Unload (LUL) cycles (25°C)		300,000 software-controlled power on/off cycles
		20,000 hard power on/off cycles

Warranty		Per agreement

4	ST1.3 Series Product Manual, Rev. C

Image 10

Contents ST1.3 Series Rev. CRevision status summary sheet Contents ST1.3 Series Product Manual, Rev. C List of Figures ST1.3 Series Product Manual, Rev. C ST1.3 Series IDE interface ZIF connector disc drive IntroductionDisclaimer Handling precautionsDrive care Power, access times and acoustics Drive specificationsSpecifications Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate Formatted capacity Default logical geometryLBA mode Model Cylinders Read/write heads Sectors per trackRecording and interface technology Physical characteristicsTechnology Specification Time to readyPower specifications DC power Typical current profileConducted noise Voltage tolerance Voltage tolerance including noisePerformance idle mode Power-management modesActive mode Standby/Sleep modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationOperating random vibration profile Operating sweep sine vibrationOperating random vibration Nonoperating sweep sine vibrationNonoperating random vibration profile Nonoperating random vibrationCorrosive environment Drive level acoustics AcousticsElectromagnetic immunity Electromagnetic immunityMeasurement type Specification ReliabilityElectromagnetic compatibility Safety certificationAgency certification Korean RRLChina Restriction of Hazardous Substances RoHS Directive FCC verificationPage ST1.3 Series Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveSeries Proper Handling example Drive installation ST1.3 Series Product Manual, Rev. C Mounting considerations ST1.3 Series Area for Protective MountingWay ZIF IDE interface connector signals Connector interface signals and connector pinsInterface description Iord Supported ATA commands Supported commands Identify Device command Word ATA specification ValueXxA5H Description if bit is set to Bit Features register values Set Features commandFeature Description ST1.3 Series Product Manual, Rev. C Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Publication feedback survey ST1.3 Series Product Manual, Rev. C Index Page Page ST1.3 Series Product Manual, Rev. C Page Seagate Technology LLC