Seagate ST660712DEG, ST680712DE Introduction, ST1.3 Series IDE interface ZIF connector disc drive

Page 7

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate® ST1.3 Series drives:

•ST612712DE-12GB, ST610712DE-10GB, ST680712DE-8GB and ST660712DE-6GB disc drives with a ZIF (zero insertion force) connector using an IDE interface.

•ST612712DEG-12GB, ST610712DEG-10GB, ST680712DEG-8GB and ST660712DEG-6GB disc drives with a ZIF (zero insertion force) connector using an IDE interface. These models incorporate an additional free-fall sensor for robust drop performance.

These drives provide the following key features.

•3,600-RPM spindle speed and a 2-Mbyte buffer combined for superior read/write performance.

•Quiet operation. Fluid Dynamic Bearing (FDB) motor.

•Giant magnetoresistive (GMR) recording heads and EPRML technology, which provide the drives with increased areal density.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•2.0K Gs nonoperating shock, and 300 Gs operating shock.

•SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

Figure 1. ST1.3 Series IDE interface (ZIF connector) disc drive

ST1.3 Series Product Manual, Rev. C

1

Image 7

Contents Rev. C ST1.3 SeriesRevision status summary sheet Contents ST1.3 Series Product Manual, Rev. C List of Figures ST1.3 Series Product Manual, Rev. C Introduction ST1.3 Series IDE interface ZIF connector disc driveDisclaimer Handling precautionsDrive care Power, access times and acoustics Drive specificationsSpecifications Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate Model Cylinders Read/write heads Sectors per track Default logical geometryLBA mode Formatted capacityTime to ready Physical characteristicsTechnology Specification Recording and interface technologyPower specifications Typical current profile DC powerVoltage tolerance Voltage tolerance including noise Conducted noiseStandby/Sleep mode Power-management modesActive mode Performance idle modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockNonoperating sweep sine vibration Operating sweep sine vibrationOperating random vibration Operating random vibration profileNonoperating random vibration profile Nonoperating random vibrationCorrosive environment Electromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsReliability Measurement type SpecificationKorean RRL Safety certificationAgency certification Electromagnetic compatibilityFCC verification China Restriction of Hazardous Substances RoHS DirectivePage ST1.3 Series Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveSeries Proper Handling example Drive installation ST1.3 Series Product Manual, Rev. C ST1.3 Series Area for Protective Mounting Mounting considerationsWay ZIF IDE interface connector signals Connector interface signals and connector pinsInterface description Iord Supported ATA commands Supported commands Word ATA specification Value Identify Device commandXxA5H Description if bit is set to Bit Features register values Set Features commandFeature Description ST1.3 Series Product Manual, Rev. C Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Publication feedback survey ST1.3 Series Product Manual, Rev. C Index Page Page ST1.3 Series Product Manual, Rev. C Page Seagate Technology LLC