Seagate ST660712DE, ST680712DE, ST610712DE, ST612712DEG Supported ATA commands Supported commands

Page 33

4.1.1Supported ATA commands

The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA commands, refer to ATA version 7 specification, Volume 1. (www.t13.org).

	Table 9:	Supported commands

	Command name		Command code (in hex)	Does command cause drive to
	Command name		Command code (in hex)	transition to active mode? [1]
				transition to active mode? [1]
	ATA-standard commands

	Check Power Mode		98H, E5H
	Download Microcode		92H	X
	Flush Cache		E7H	X
	Identify Device		ECH
	Idle		97H, E3H	X
	Idle Immediate		95H, E1H	X
	Read DMA		C8H, C9H	X
	Read Multiple		C4H	X
	Read Sectors		20H, 21H	X
	Seek		7XH	X
	Set Features		EFH	X
	Set Multiple Mode		C6H	X
	Sleep		99H, E6H
	Smart		B0h	X

	Standby		96H, E2H	X
	Standby Immediate		94H, E0H	X
	Write DMA		CAH, CBH	X
	Write Multiple		C5H	X
	Write Sectors		30H, 31H	X

[1]‘X’ indicates: If the drive is in Standby mode, it will cause the drive to spin up to Active mode in order to execute the command.

ST1.3 Series Product Manual, Rev. C

27

Image 33

Contents Rev. C ST1.3 SeriesRevision status summary sheet Contents ST1.3 Series Product Manual, Rev. C List of Figures ST1.3 Series Product Manual, Rev. C Introduction ST1.3 Series IDE interface ZIF connector disc driveHandling precautions DisclaimerDrive care Drive specifications Power, access times and acousticsSpecifications Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate LBA mode Default logical geometryFormatted capacity Model Cylinders Read/write heads Sectors per trackTechnology Specification Physical characteristicsRecording and interface technology Time to readyPower specifications Typical current profile DC powerVoltage tolerance Voltage tolerance including noise Conducted noiseActive mode Power-management modesPerformance idle mode Standby/Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationOperating random vibration Operating sweep sine vibrationOperating random vibration profile Nonoperating sweep sine vibrationNonoperating random vibration Nonoperating random vibration profileCorrosive environment Electromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityReliability Measurement type SpecificationAgency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification China Restriction of Hazardous Substances RoHS DirectivePage ST1.3 Series Product Manual, Rev. C Configuring and mounting the drive Handling and static discharge precautionsSeries Proper Handling example Drive installation ST1.3 Series Product Manual, Rev. C ST1.3 Series Area for Protective Mounting Mounting considerationsConnector interface signals and connector pins Way ZIF IDE interface connector signalsInterface description Iord Supported ATA commands Supported commands Word ATA specification Value Identify Device commandXxA5H Description if bit is set to Bit Set Features command Features register valuesFeature Description ST1.3 Series Product Manual, Rev. C Internet Seagate Technology support servicesPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Publication feedback survey ST1.3 Series Product Manual, Rev. C Index Page Page ST1.3 Series Product Manual, Rev. C Page Seagate Technology LLC