Seagate ST612712DE, ST680712DE manual Drive installation, ST1.3 Series improper handling example

Page 28

Figure 8. ST1.3 Series improper handling example

Always rest the drives on a padded, antistatic surface until you mount it in the system.

Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

If provided, store drive in the protective casing when not in use.

Turn the power off before installing or removing the drive.

Do not cover the breather hole with any type of label, sticker, or impede the flow of air at any time.

3.2Drive installation

See figure 9 for drive mechanical dimensions.

Follow these installation precautions when inserting the drive:

Follow instructions for the installation of data storage devices, provided with your device’s user manual.

Do not obstruct the breather hole on the drive (see Figure 4).

22

ST1.3 Series Product Manual, Rev. C

Image 28
Contents ST1.3 Series Rev. CRevision status summary sheet Contents ST1.3 Series Product Manual, Rev. C List of Figures ST1.3 Series Product Manual, Rev. C ST1.3 Series IDE interface ZIF connector disc drive IntroductionDisclaimer Handling precautionsDrive care Power, access times and acoustics Drive specificationsSpecifications Gs 0 to peak, 10-500 Hz @ 0.5 oct/min sweep rate Default logical geometry LBA modeFormatted capacity Model Cylinders Read/write heads Sectors per trackPhysical characteristics Technology SpecificationRecording and interface technology Time to readyPower specifications DC power Typical current profileConducted noise Voltage tolerance Voltage tolerance including noisePower-management modes Active modePerformance idle mode Standby/Sleep modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationOperating sweep sine vibration Operating random vibrationOperating random vibration profile Nonoperating sweep sine vibrationNonoperating random vibration profile Nonoperating random vibrationCorrosive environment Acoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunityMeasurement type Specification ReliabilitySafety certification Agency certificationElectromagnetic compatibility Korean RRLChina Restriction of Hazardous Substances RoHS Directive FCC verificationPage ST1.3 Series Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveSeries Proper Handling example Drive installation ST1.3 Series Product Manual, Rev. C Mounting considerations ST1.3 Series Area for Protective MountingWay ZIF IDE interface connector signals Connector interface signals and connector pinsInterface description Iord Supported ATA commands Supported commands Identify Device command Word ATA specification ValueXxA5H Description if bit is set to Bit Features register values Set Features commandFeature Description ST1.3 Series Product Manual, Rev. C Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Publication feedback survey ST1.3 Series Product Manual, Rev. C Index Page Page ST1.3 Series Product Manual, Rev. C Page Seagate Technology LLC