QuickSpecs
HP ProLiant BL20p
Technical Specifications
Operating and | Dimensions | Height | 10.405 in (26.43 cm) | |
Performance |
| Width | 1.535 in (3.899 cm) | |
Specifications for RJ- |
| Depth | 27.697 in (70.35 cm) | |
45 Patch Panel |
| |||
Capability | IEEE 802.2, 802.3, 802.3u | |||
| ||||
| Network Transfer Rate | 10 | 10 Mbps | |
|
| 10 | 20 Mbps | |
|
| 100 | 100 Mbps | |
|
| duplex) |
| |
|
| 100 | 200 Mbps | |
|
| duplex) |
| |
|
| 1000 | 1000 Mbps | |
|
| duplex) |
| |
| Connector |
| ||
| Cable Support | 10 | Categories 3, 4, or 5 UTP (2 or 4 pair); up to | |
|
|
| 328 ft (100 m) | |
|
| 100 | Category 5 UTP (2 pair); up to 328 ft (100 m) | |
|
| 1000 | Category 5E (4 pair); up to 328 ft (100 m) | |
| Power Requirements | 200 mA at + 5V DC; 500 mA at | ||
| Temperature Range | Operating | 50° to 95° F (10° to 35° C) | |
|
| |||
| Relative Humidity | Operating | 20% to 80% | |
| 5% to 95% | |||
| Wet Bulb Temperature Operating | 82.4° F (28° C) | ||
|
| 101.7° F (38.7° C) |
NOTE: Operating temperature has an altitude derating of 34° F per 1,000 ft (1° C per 304.8 m). No direct sunlight. Upper operating limit is 10,000 ft or 70Kpa (3,048 m or 10.1 psia). Upper non- operating limit is 30,000 ft or 30.3 KPa (9,144 m or 4.4 psia). Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and | Dimensions | Height | 10.405 in (26.43 cm) | |
Performance |
| Width | 1.535 in (3.899 cm) | |
Specifications for GbE2 |
| Depth | 27.697 in (70.35 cm) | |
Interconnect Switch |
| |||
Weight | 12.0 lb/5.4 kg per interconnect switch | |||
| ||||
| Performance | 24 Gbps External port bandwidth per server blade enclosure (full | ||
|
| duplex) |
| |
|
| Forwarding rate 1.5 million pps per gigabit port | ||
|
| |||
|
| support |
| |
| Forwarding Mode | Store and forward |
| |
| MAC Addresses | 2,048 per interconnect switch | ||
| Forwarding table age Maximum age: 1 to 65535 seconds; default: 300 seconds | |||
| time |
|
| |
| Memory | 128MB Main, 32MB flash and 2MB packet buffer per interconnect | ||
|
| switch |
| |
| Compliance | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z | ||
|
| 802.3ac, 802.3ad (Static), and 802.1Q |
DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004 | Page 28 |