Server Technology BL20P manual QuickSpecs

Page 34

QuickSpecs

HP ProLiant BL20p p-Class Server Blade

Technical Specifications

measured at the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement leads are properly shielded with Earth grounds applied to the insert.

© Copyright 2004 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004

Page 34

Image 34

Contents 42U Rack with ProLiant BL p-Class System Installed OverviewProLiant BL20p Server Blade includes ProLiant BL p-Class Power EnclosureProLiant BL p-Class Power Distribution ProLiant BL p-Class Server Blade EnclosureQuickSpecs QuickSpecs Configuration Steps QuickSpecs Standard Features Server Blade ProLiant BL p-Class Server Blade Enclosure and Interconnects Standard Features Server Blade Enclosure and Interconnects ProLiant BL p-Class Interconnect Switch OptionRequired Network CablingStandard Features Power System and Rack Information Standard Features OS Support SmartStartIntelligent Availability SecurityRequirements Minimum RackRack Airflow QuickSpecs Models Options OptionsStorage Controllers CommunicationsBL p-Class Server Blade EnclosuresDiagnostic Options BL p-Class Power OptionsPower Distribution USB OptionsCustom Builder HP Rack 10000 SeriesRack Options for HP Rack 10000 Series Options/index.htmlService and Support Offerings HP Care Country Code Keyfor 1U Rack Keyboard & Drawer PNInstallation & Start-up Services Standard Memory Plus Optional Memory MemoryStandard Memory Replaced with Optional Memory Technical Specifications Connector Operating DimensionsSpecifications for RJ Power RequirementsSafety Non-condensingForwarding table age Ambient Temperature WeightsSpecifications Input requirementsRange Power Enclosures WeightsSupported enclosures Dimensions Rated operatingSupported Total max input current 69.44 a at -43.2VDC Max total powerMax current per power At minimum voltageQuickSpecs