QuickSpecs
HP ProLiant BL20p
Technical Specifications
| duplex) |
|
| Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per | |
| gigabit port, | |
| ||
| ||
| support |
|
Forwarding Mode | Store and forward |
|
MAC Addresses | 8,191 per interconnect switch; MAC address based filtering and MAC | |
| address packet priority configuring | |
Forwarding table age | Maximum age: 1 to 1,000,000 seconds; default: 300 seconds | |
time |
|
|
Memory | 32MB Main, 6MB flash and 16MB packet buffer per interconnect switch | |
Compliance | IIEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z | |
| 802.1p, 802.3ac, 802.3ad (Static), and 802.1Q | |
| SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 | |
| ||
| 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB (RFC | |
| 2674), Entity MIB (RFC 2037), SNMP Trap Convention (RFC 1215), | |
| Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757), and HP | |
| Enterprise Switch MIBs and Environmental Traps | |
| IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet | |
| (RFC 854), TFTP client (RFC 783), BOOTP client, (RFC 2132), DHCP | |
| client, (RFC 2131) and ZModem | |
Network Transfer Rate | 10 | 10 Mbps |
| 10 | 20 Mbps |
| 100 | 100 Mbps |
| duplex) |
|
| 100 | 200 Mbps |
| duplex) |
|
| 1000 | 1000 Mbps |
| duplex) |
|
| 1000 | 2000 Mbps |
| duplex) |
|
| 1000 | 2000 Mbps |
| duplex) |
|
Connector | 12 | |
| 4 LC fiber, 8 | |
EMI | FCC Class A |
|
|
| |
| AS/NZS 3548 Class A |
|
| VCCI Class A |
|
Safety | UL/CUL Listed Accessory | |
| CE |
|
Power Requirements | ||
Temperature Range | Operating | 50° to 95° F (10° to 35° C) |
| ||
Relative humidity | Operating | 20% to 80% |
| 5% to 95% | |
Wet Bulb Temperature Operating | 82.4° F (28° C) | |
| 101.7° F (38.7° C) |
DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004 | Page 30 |