Overview
Scalable bus bar | Mini bus bar | Bus boxes |
BL p-Class power distribution
Configuration Steps
For a complete configuration of the ProLiant BL20p, do the following:
1.Select BL p-Class server blades:
Single Intel Pentium III 1.40 GHz processor, 512-MB ECC SDRAM (2 X 256MB) (230040-B21)
or
Two Intel Pentium III 1.40 GHz processors, 1-GB ECC SDRAM (2 X 512MB) (257959-B21) (Not offered in NA) (NOTE: Additional options include processors, memory, and gigabit NICs.)
PLUS
2.Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 8 ProLiant BL20p server blades):
BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B21)
or
BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
PLUS
3.Select an interconnect. Interconnects are sold in pairs. One pair of interconnects is required with each BL p-Class server blade enclosure:
BL p-Class RJ-45 Patch Panel (with 32 RJ-45 connectors) (230766-B21) or
BL p-Class RJ-45 Patch Panel 2 (with Fibre Channel pass through and 32 RJ-45 connectors) (306465-B21) NOTE: Fibre Channel connectivity is not available on the BL20p.
or
BL p-Class C-GbE2 Interconnect Kit (with 12 RJ-45 10/100/1000 T/TX/T external ports) (283192-B21) or
BL p-Class F-GbE2 Interconnect (with 8 LC 1000 SX and 4 RJ-45 10/100/1000 T/TX/T external ports) (283193-B21) or
BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 8 RJ-45 10/100 T/TX external ports (249655-B21)
DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004 | Page 5 |
4.
