Tyan Computer B4881V50S4H Screws Required Location, Installing SATA/SCSI hot swap drives

Page 31

			2.3 Installing hard drives

		Screws Required	Location

	6	Pan Head screws, #6-32-L6 B type	Backplane

	2	Hex head #6-32-L6	Cradle locking bar

2.3.2Installing SATA/SCSI hot swap drives

1.Press the release clip and pull the release lever to unlock the drive tray from the chassis.

2.Pull the empty drive tray from the chassis.

3.Remove the four screws holding the plastic spacer in place in the drive tray and remove it from the tray.

4.Place a SATA or SCSI drive in place in the drive tray and secure with four screws.

Chapter 2: Setting up

23

Image 31

Contents B4881V50S4H Page Disclaimer CopyrightTrademark recognition Federal Communications Commission Overview About this manualSafety information Table of Contents Appendix About the B4881V50S4H OverviewFeatures FeaturesUnpacking Box contents Component DescriptionUnpacking Component Description AccessoriesOpening the box System rear view About the productAbout the product System front view and front panelSystem internal view HT Connector connect to CPU board Motherboard block diagramFourth CPU board block diagramFan header locations Work area Before you beginTools Before you begin PrecautionsInstalling motherboard components Installing motherboard componentsRemoving the chassis cover Installing CPUs and heatsinks Installing motherboard components Installing memory Position the memory module in the slot Installing CPU expansion board Screws Required Location Installing hard drives Installing hard drivesInstalling PCI-X cards Installing a storage backplane Connect power and data cables to the backplane Installing SATA/SCSI hot swap drives Installing internal hard drives Connect power and data cables to the new drive Rack mounting Rack mountingRack mounting Rack mounting Standalone StandaloneFitting the front door assembly Fitting the front door assemblyFitting the front door assembly Page Replacing motherboard components Disconnecting all motherboard cablesPower cables IntroductionReplacing motherboard components IDE cable CD-ROM CPU fan power cablesSata cables USB cables Replacing motherboard components Floppy disk drive cablesLED control board cables J119 ID Switch and J118 LED LED Control board connector J115 pin out Function Color PinReplacing motherboard components Replacing the CPU expansion board Replacing the slim CD-ROM drive Replacing the slim CD-ROM driveReplacing the motherboard Replacing the slim CD-ROM drive Replacing the floppy disk drive Replacing the floppy disk driveReplacing the Sata backplane Replacing the Sata backplaneReplacing the Sata backplane Replacing power supplies Replacing power suppliesReplacing cooling fans Replacing cooling fans Hardware monitor submenu PhoenixBIOS Setup UtilityIntegrated devices submenu Feature Option DescriptionDirect Remote access configuration submenuTechnical support Returning merchandise for serviceHelp resources