Tyan Computer B4881V50S4H user manual Replacing the Sata backplane

Page 49

3.5Replacing the SATA backplane

2.Remove the power and data cables from the floppy disk drive.

3.Loosen the two retaining screws that secures the floppy disk drive in place.

4. Slide the disk drive from the chassis.

5.Slide the new unit into place, secure with the retaining screw and replace the power and data cables.

3.5Replacing the SATA backplane

This section describes how to replace the SATA backplane on your B4881V50S4H.

1.Remove the chassis cover. See Removing the chassis cover on page 13.

Chapter 3: Replacing pre-installed components

41

Image 49
Contents B4881V50S4H Page Disclaimer CopyrightTrademark recognition Federal Communications Commission Overview About this manualSafety information Table of Contents Appendix About the B4881V50S4H OverviewFeatures FeaturesUnpacking Box contents Component DescriptionUnpacking Component Description AccessoriesOpening the box About the product About the productSystem front view and front panel System rear viewSystem internal view HT Connector connect to CPU board Motherboard block diagramFourth CPU board block diagramFan header locations Work area Before you beginTools Before you begin PrecautionsInstalling motherboard components Installing motherboard componentsRemoving the chassis cover Installing CPUs and heatsinks Installing motherboard components Installing memory Position the memory module in the slot Installing CPU expansion board Screws Required Location Installing hard drives Installing hard drivesInstalling PCI-X cards Installing a storage backplane Connect power and data cables to the backplane Installing SATA/SCSI hot swap drives Installing internal hard drives Connect power and data cables to the new drive Rack mounting Rack mountingRack mounting Rack mounting Standalone StandaloneFitting the front door assembly Fitting the front door assemblyFitting the front door assembly Page Power cables Disconnecting all motherboard cablesIntroduction Replacing motherboard componentsReplacing motherboard components IDE cable CD-ROM CPU fan power cablesSata cables USB cables Replacing motherboard components Floppy disk drive cablesLED control board cables J119 ID Switch and J118 LED LED Control board connector J115 pin out Function Color PinReplacing motherboard components Replacing the CPU expansion board Replacing the slim CD-ROM drive Replacing the slim CD-ROM driveReplacing the motherboard Replacing the slim CD-ROM drive Replacing the floppy disk drive Replacing the floppy disk driveReplacing the Sata backplane Replacing the Sata backplaneReplacing the Sata backplane Replacing power supplies Replacing power suppliesReplacing cooling fans Replacing cooling fans Hardware monitor submenu PhoenixBIOS Setup UtilityIntegrated devices submenu Feature Option DescriptionDirect Remote access configuration submenuTechnical support Returning merchandise for serviceHelp resources