Tyan Computer InterServe 90 manual CPU Settings for 66MHz Bus, CPU Settings for 100MHz Bus

CPU Settings for 66MHz Bus

Clock Speed	Mult	JP11	JP12	JP13	JP14
233MHz	x3.5	ON	OFF	OFF	ON
266MHz	x4	OFF	ON	ON	ON
300MHz	x4.5	OFF	ON	OFF	ON
333MHz	x5	OFF	OFF	ON	ON

CPU Settings for 100MHz Bus

Clock Speed	Mult	JP11	JP12	JP13	JP14
350MHz	x3.5	ON	OFF	OFF	ON
400MHz	x4	OFF	ON	ON	ON
450MHz	x4.5	OFF	ON	OFF	ON

The above clock speed settings control only the clock multiplier. 233MHz corresponds to 3.5x; 266MHz corresponds to 4x, etc. The bus speed is BIOS selectable. Tyan does not recommend operating CPUs, memory or the PCI bus at higher than rated speed. Tyan takes no responsibility for any problems related to overclocking any bus or component on the system board.

CMOS Reset

	JP3
Default	1-2
Reset CMOS	2-3

ONBOARD

To reset CMOS settings place JP3 on pins 2-3 for 5 seconds, then replace it to the default pins 1-2 setting again for normal operation.

JP3

JP11, JP12, JP13, JP14

http://www.tyan.com

29