Clarion Understanding BBE MP for Enhanced Audio Quality in Your CD Player

Basic Operations

∗ The factory default setting is “THROUGH”.	Setting the BBE MP
● Adjusting the subwoofer output	(Sound Enhancement and
	Restoration for compressed audio
volume
You can adjust the volume output from the unit’s	files)
subwoofer output terminal.	BBE MP (Minimized Polynomial Non-Linear
2-1. Select “S-W VOL”.	Saturation) Process improves digitally
3-1. Press the [ ] or [ ] button to increases	compressed sound, such as MP3, by restoring
	and enhancing the harmonics lost through
or decreases the subwoofer volume.
	compression. BBE MP works by regenerating
∗ The factory default setting is “0”.
	harmonics from the source material, effectively
(Adjustment range: +6 to –6)
	recovering warmth, detail and nuance.

English

●Adjusting the high pass filter

2-1. Select “HPF”.

3-1. Each time you press the [ ] or [ ] button to select the setting.

The setting changes in the following order: “THROUGH” ↔ “60” ↔ “90” ↔ “120”

∗The factory default setting is “THROUGH” (through).

∗This fuction is effective for the audio files in the CD/MP3/WMA/AAC or USB/iPod mode, but it is ineffective for the video in the USB/iPod mode.

1.Press the [SOUND] button to switch to the sound adjustment selection display.

2.Press the [x] or [v] button to select “BBE MP”.

3.Press the [ ] or [ ] button to select “ON” or “OFF”.

∗ The factory default setting is “OFF”.

4.When you select “ON”, press the [ ] button,

then press the [ ] or [ ] button to select as following order.

LOW ↔ MID ↔ HIGH

Notes:

•Manufactured under license from BBE Sound, Inc.

•Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.

CZ509 13