USB/MTP Operations
•Do not turn on vehicle ignition when the MTP device is connected, since it may result in loss or damage to data on the MTP device. Connect the MTP device to the USB cable after vehicle ignition is turned on.
Connecting a USB memory/MTP device
1.Connect the USB memory/MTP device to the USB cable.
Playback will begin from the first file recorded on the device.
∗If the device is not recognized, press the [SRC] button to switch the source to the device.
∗Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.
∗Depending on the number of tracks recorded, some amount of time may be required until all tracks are read into the unit.
∗The order in which tracks are recorded may differ depending on the device connected (the actual playback order may not be the same as that indicated on your computer’s display).
To listen to tracks on a connected USB memory/MTP device
1.Press the [SRC] button to switch the source. When USB memory/MTP device is selected, playback (except DRM files) will begin from the location at which playback was previously stopped.
∗When a USB memory/MTP device is connected the USB/MTP mode will be displayed.
∗When a USB memory/MTP device is disconnected and then reconnected, playback will begin from the beginning of the USB memory/MTP device.
∗When “MTP” mode is selected, AAC files on the MTP device cannot be played.
To stop play
1.Press the [SRC] button and switch the function to a source other than the USB memory.
CAUTION
Do not remove the USB memory/MTP device when the USB/MTP mode is selected, since it may result in loss or damage to data on the USB memory/MTP device.
Always backup and save important data on your computer.
2.Remove the USB memory/MTP device from the USB cable.
English
CZ509 27