Clarion CZ509 Backup Eject function, Listening to a disc already loaded in the unit, Pausing play

CD/MP3/WMA/AAC Operations

Disc-In-Play function Loading a CD

English

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

CAUTION

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts.

Notes:

•Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

•Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

3.Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

Backup Eject function

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

∗If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [EJECT] button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

∗Press the center of the DCP to close.

Notes:

•Always close the FLIP DOWN PANEL once you take out the disc.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

•If you force a CD into before auto reloading, this can damage the CD.

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/MP3/ WMA/AAC mode.

When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

∗If the FLIP DOWN PANEL does not open fully, gently open with your hand.

∗After loading a CD, always close the FLIP DOWN PANEL.

Pausing play

1.Press the [ ] button to pause play. “PAUSE” appears in the display.

2.To resume CD play, press the [ ] button again.

Displaying CD titles

This unit can display title data for CD-text/MP3/ WMA/AAC disc and user titles input with this unit.

1.Each time you press the [DISP] button to change the title display.

●CD-TEXT disc

User ➜ Track ➜ Disc/Artist ➜ User ...

●MP3/WMA/AAC disc

Track ➜ Folder ➜ Title/Album ➜ Artist ➜

Track ...

16 CZ509