Clarion CZ509 owner manual Bluetooth Firmware version, Bluetooth Name

Bluetooth Operations

English

●AUTO ANS

This is a setting to determine whether any incoming call will be automatically or manually answered.

∗The factory default setting is “OFF”.

2-1. Select “AUTO ANS”.

3-1. Press the [] or [] button to select “ON” or “OFF”.

●Bluetooth Firmware version

This will display the Firmware version of the Bluetooth.

2-1. Select “BT FW”.

The Bluetooth Firmware version appears in the display.

ON: Any incoming call is automatically answered in 5 seconds.

OFF: User needs to manually answer the call.

●AUTO CONNECT

This function allows the Bluetooth to be connected automatically with previously connected device. Connection can be established at any source mode.

∗The factory default setting is “OFF”.

2-1. Select “AUTO CON”.

3-1. Press the [] or [] button to select “ON” or “OFF”.

ON: Automatic connection is enabled.

OFF: Automatic connection is disabled.

●PASS KEY

This PASS KEY is used during pairing mode. A maximum of 10 digits can be changed through the car stereo.

∗The factory default PASS KEY is “1234”.

2-1. Select “PASS KEY”.

3-1. Press the [ ] button.

4-1. Press the [x] or [v] button to remove the cursor.

5-1. Press the [] or [] button to select the desired digits.

6-1. Press and hold the [ ] button (2 sec.) to store in memory.

∗If press the [BND] button, the pass key returns to the factory default setting.

●ADDRESS

This will hold the unique Bluetooth address. The address is 12 figures.

2-1. Select “ADDRESS”.

The Bluetooth address 6 figures appears in the display.

3-1. Press the [] or [] button to display.

●Bluetooth Name

This will display the name of the Bluetooth.

2-1. Select “BT NAME”.

The Bluetooth name appears in the display.

22 CZ509