CD/MP3/WMA/AAC Operations
MP3/WMA/AAC
This unit can play back MP3/WMA/AAC files.
Notes:
•If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks).
•Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
●To disable DRM (Digital Rights Management)
1.When using Windows Media Player 9/10/11, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files.
Personally constructed WMA files are used at your own responsibility.
2.The folder name and file name can be displayed as the title during MP3/WMA/AAC play but the title must be within 64 single byte alphabetical letters and numerals (including an extension).
3.Do not affix a name to a file inside a folder having the same name.
●Folder structure
1.A disc with a folder having more than 8 hierarchical levels will be impossible.
●Number of files or folders
1.Up to 255 files can be recognized per folder. Up to 510 files can be played.
2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)
3.Some noise may occur depending on the type of encoder software used while recording.
English
Precautions when creating MP3/ WMA/AAC file
●Usable sampling rates and bit rates 1. MP3: Sampling rate 8
Bit rate 8
2. WMA: Bit rate 8
3. AAC: Sampling rate 8
●File extensions
1.Always add a file extension “.MP3”, “.WMA” or “.M4A” to MP3, WMA or AAC file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played.
2.Files without MP3/WMA/AAC data will not play. The files will be played soundlessly if you attempt to play files without MP3/WMA/ AAC data.
∗When VBR files are played, the play time display may differ the play location.
∗When MP3/WMA/AAC files are played, a little no sound part is caused between tunes.
●Logical format (File system)
1.When writing MP3/WMA/AAC file on a
Set the type of file to be played (multi-session function)
When a single disc holds both normal CD type tracks and MP3/WMA/AAC type tracks, use this command to select which type of track to play.
∗Default setting is “CD”.
•When only one type of track (either music CD or MP3/WMA/AAC) is recorded on a disc, selecting either type will allow playback of the disc.
•When playing CCCD
1.Press and hold the [DISP] button for 1 second or longer.
2.Press the [x] or [v] button to select
3.Press the [ 
] or [ 
] button to select the “CD” or “MP3”.
•“CD”
When playing music CD only.
•“MP3”
When playing music MP3/WMA/AAC only.
4.When setting is completed, remove the disc and reinsert it.
CZ509 15