Clarion XDZ716 owner manual Recalling a preset programme, AF function, Info Announcement

Digital Radio / DAB Operations

Manual memory TA (Traffic Announcement)

	Digital Radio / DAB Operations
ment broadcast reception is cancelled and the	PTY
main unit goes into INFO standby mode.

The main unit has a manual memory function for DAB programmes. Up to 18 programmes (6 programmes each) can be preset in the pre- set buttons.

[M1], [M2] and [M3]

1.Press FNC button 3 to select DAB mode.

2.Press BND button " to select any one shown above.

3.Press the right or left SEARCH button % to select a desired programme.

4.Press and hold one of Preset buttons (1 to 6) 9 for 2 seconds or longer to store the programme.

Note:

•The interrupt programme (PTY or INFO) cannot be written into a manual memory.

Recalling a preset programme

1.Press FNC button 3 to select DAB mode.

2.Press BND button ". Each time you press BND button ", the display changes in the following order:

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

3.Press one of Preset buttons 9 to recall a preset programme.

Note:

•Press and hold Preset button 9 for 2 seconds or longer to store the programme currently being re- ceived. (Manual memory)

In TA standby mode, when a traffic announce- ment broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) automatic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB broadcast station being received has traffic announcement programmes.

●Setting TA standby mode

If you press TA button ! when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into TA standby mode until a traffic an- nouncement is broadcast.When a traffic announce- ment broadcast starts, “TRA INFO” appears in the display. If you press TA button ! while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is can- celled and the unit goes into TA standby mode.

●Cancelling TA standby mode

With “TP” and “TA” lit in the display, press TA button !. The “TA” in the display goes off and TA standby mode is cancelled.

∗If “TP” is not lit, pressing TA button ! searches for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press TA button !, “TA” in the display lights and the unit automati- cally receives a TP station.

Note:

● Cancelling INFO standby mode			This function enables you to listen to the selected
			programme type, irrespective of the function
To cancel INFO standby mode, press and hold			mode.
TA button ! for 1 second or longer.			∗ PTY broadcasts are not yet available in all countries.
● Information select			∗ In INFO standby mode, INFO stations have priority
				over PTY stations.
This is a function for selecting INFORMATION
			∗ In TA standby mode, TP stations have priority over
ON or OFF in Information interrupt mode.				PTY stations.
You can set ON up to 6 information items.
					PTY item
You can select any of the 6 items below:
				ENGLISH	Contents
	INFORMATION item			News	News
ENGLISH		Contents		Inform	Information
Travel		Transport flash
				Sports	Sports
Warning		Warning / Service
				Talk	Talk
News		News flash
				Rock	Rock
Weather		Area weather flash
				Cls Rock	Classic Rock
Event		Event announcement
				Adlt Hit	Adult Hits
Special		Special event
				Soft Rck	Soft Rock
1. Perform the following operation depending on
				Top 40	Top 40
the connected model.
				Country	Country
Press and hold ADJ button 2 for 1 second or
				Oldies	Oldies
longer.
				Soft	Soft
2. Press the right or left SEARCH button % to
				Nostalga	Nostalgia
select “INFO SEL”, then push ENT button &
				Jazz	Jazz
to enter “INFO SEL” mode.
3. Press the right or left SEARCH button % to				Classicl	Classical
select an information item.You can select any				R&B	Rhythm and Blues
of 6 items:
				Soft R&B	Soft Rhythm and Blues

AF function

The AF function switches to a different frequency on the same network in order to maintain optimum reception.

∗The factory default setting is “ON”

∗If the reception of the current broadcast station deteriorates, “SEARCHING FOR SAME STATION” or “SEARCH” appears in the display and the radio searches for the same programme on another frequency.

●Switching OFF the AF function

Press AF button 6. “AF” in the display goes off and the AF function turns off.

●Switching ON the AF function

Press AF button 6. “AF” in the display lights and the AF function turns on.

∗If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and the radio searches for the same programme on another frequency.

•If a TP station is not received, the unit continues the search operation. Pressing TA button ! again goes off “TA” in the display and stops TP station searching.

INFO (Announcement)

In INFO standby mode, when the selected announcement programme starts, the main unit switches to the selected announcement programme automatically.

●Setting INFO standby mode

If you press and hold TA button ! for 1 second or longer, “INFO” lights in the display and the main unit is set into INFO standby mode until the selected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold TA button ! for 1 second or longer while the selected announcement broad- cast is being received, the selected announce-

4. Perform the following operation depending on	Language	Language
the connected model.
	Rel Musc	Religious Music
Turn the Rotary knob ( clockwise or
	Rel Talk	Religious Talk
counterclock wise to set the information item
	Persnlty	Personality
for ON or OFF.
5. Press ADJ button 2 to return to the previous	Public	Public
display.	● Setting PTY standby mode

When you press PTY button 7, “PTY” lights in the display and the PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.

● Cancelling PTY standby mode

When you press and hold PTY button 7 for 1 second or longer, “PTY” goes off in the display and PTY standby mode is cancelled.

● Cancelling a PTY interrupt broadcast

Press PTY button 7 during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode.

28 XDZ716 XDZ716 29