Clarion XDZ716 owner manual CD Operations

Radio Operations

2. Press and hold AS button 5 for 2 seconds or

longer. The stations with good reception are

stored automatically to the preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

CD Operations

Loading a CD

1.Press OPEN button 4. The SLOPING CON- SOLE opens.

CAUTION .

	CD Operations
Ejecting a CD	Top function
1. Press the EJECT button 4. The SLOPING	The top function resets the CD player to the first
CONSOLE opens and a CD ejects. “EJECT”	track of the disc. Press TOP button " to play the
appears in the display.	first track (track No. 1) on the disc.

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in pre- set memory in order. This function is useful when searching for a desired station in memory.

1.Press PS button 5.

2.When a desired station is tuned in, press PS button 5 again to continue receiving that sta- tion.

Note:

•Be careful not to press and hold PS button 5 for 2 seconds or longer, otherwise the auto store func- tion is engaged and the unit starts storing stations.

Be careful not to get your fingers caught when opening and closing the SLOPING CONSOLE.

2.Insert a CD into the centre of the insertion slot with the label side facing up. The CD plays automatically after loading.

Notes:

•Never insert foreign objects into the CD insertion slot.

•If the CD is not inserted easily, there may be an- other CD in the mechanism or the unit may re- quire service.

•Discs not bearing the mark and CD-ROMs cannot be played by this unit.

Loading 8 cm compact discs

∗No adapter is required to play an 8 cm CD.

∗Insert the 8 cm CD into the centre of the insertion slot.

3.After loading a CD, the SLOPING CONSOLE closes automatically.

Notes:

•Note that SLOPING CONSOLE close immediately after a CD is inserted into CD insertion slot.

•If no CD is loaded in the SLOPING CONSOLE, it closes after 30 seconds.

Listening to a CD already inserted

Press FNC button 3 to select the CD mode. Play starts automatically. If no CD is loaded in the unit, “NO DISC” appears in the display.

Pausing play

1.Press Play/pause button & to pause play. “PAUSE” appears in the display.

2.To resume CD play, press Play/pause button & again.

CAUTION

Be careful not to get your fingers caught when opening and closing the SLOPING CONSOLE.

2.Remove the CD and press OPEN button 4 to close the SLOPING CONSOLE.

Notes:

•Be sure to close the SLOPING CONSOLE after removing the CD.

•The SLOPING CONSOLE closes automatically 30 seconds after removing the CD.

∗If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload)

∗8 cm CDs are not auto reloaded. Be sure to re- move it when ejected.

Note:

•If you force a CD into before auto reloading, this can damage the CD.

Selecting a track

●Track-up

1.Press the right side of SEARCH button % to move ahead to the beginning of the next track.

2.Each time you press the right side of SEARCH button %, the track advances ahead to the beginning of the next track.

●Track-down

1.Press the left side of SEARCH button % to move back to the beginning of the current track.

2.Press the left side of SEARCH button % twice to move to the beginning of the previous track.

Fast-forward/fast-backward

●Fast-forward

Press and hold the right side of SEARCH button

%for 1 second or longer.

●Fast-backward

Press and hold the left side of SEARCH button

%for 1 second or longer.

Scan play

The scan play locates and plays the first 10 sec- onds of each track on a disc automatically. This function continues on the disc until it is cancelled.

∗The scan play is useful when you want to select a desired track.

1.Press the SCN button 5 to start scan play. “SCN” lights in the display.

2.To cancel the scan play, press the SCN but- ton 5 again. “SCN” goes off from the display and the current track continues to play.

Repeat play

The repeat play continuously plays the current track. This function continues automatically until it is cancelled.

1.Press the RPT button 6. “RPT” lights in the display and the current track is repeated.

2.To cancel the repeat play, press the RPT but- ton 6 again. “RPT” goes off from the display and normal play resumes.

Random play

The random play selects and plays individual tracks on a disc in no particular order. This function con- tinues automatically until it is cancelled.

1.Press the RDM button 7. “RDM” lights in the display, an individual track is selected ran- domly and play begins.

2.To cancel the random play, press the RDM button 7 again. “RDM” goes off and normal play resumes.

14 XDZ716 XDZ716 15