Omega Engineering OM-DAQ-USB-2401 manual Input Ranges, Analog Input Configuration

Page 33

Software 4

The converter is comprised of a 4th-order, delta-sigma (Δ∑) analog-to-digital (A/D) converter modulator followed by a programmable digital filter. A flexible input multiplexer handles differential or single-ended signals; the programmable filter allows the user to optimize between a resolution of up to 23 bits noise-free. Examples of scan sequences, with various channel resolutions and calibration arrangements, appear in Table 5-1 on page 5-2.

4.7 Input Ranges

You can individually select the input range for each channel. For example, one channel could be used for volts and another for temperature. Omega’s OM- DAQ-USB-2401 automatically assigns the appropriate units depending on two factors:

The selected range and

Measurement unit preferences

Measurement unit preferences can be modified from the Omega DAQ Central ‘Channels’ tag of the ‘Configuration’ window. Chapter 4 provides more detailed information.

NOTE:

The maximum voltage input range (full scale) is –10 to +10 Vdc. The lowest programmable voltage input range is -30mV to +30 mV. A complete list of the OM-DAQ-USB-2401’s programmable ranges appears on page 8-1.

Each analog input channel has the following user-specified measurement parameters:

Signal type: volts, or thermocouple type J, K, T, E, R, S, B, or N

Full scale voltage: from -10 to + 10 Vdc; with programmable ranges as indicated on page 8-1.

Resolution/sample period: from 22.5 bit RMS at 0.153 samples/sec, to 17 bit RMS at 50 samples/sec or greater

NOTE:

These rates were obtained with a 16-channel scan.

4.8 Analog Input Configuration

The OM-DAQ-USB-2401 includes 16 analog signal inputs which may be used as 16 single-ended inputs, 8 differential inputs, or as a combination of single-ended and differential inputs with up to 16 connections.

Single-ended inputs are used with signals that share the same common low (COM), such as multiple batteries which have their negative sides connected in common. Differential inputs are required when signals do not share the same common low, such as in the typical use of thermocouples.

4-15

Image 33
Contents OM-DAQ-USB-2401 Servicing North America OM-DAQ-USB-2400 Multiple Channel USB Data Acquisition Module International Usage and CE Marking 10-1 OM-DAQ-USB-2400Section List of FiguresExamples of Under Sampling Introduction PrecautionsSafety Warnings and IEC Symbols Statement on CE MarkingGeneral Description & System Components System Components Hardware Package InspectionIncluded Items Hardware Setup USB Hubs and Power AdaptorsOM-DAQ-USB-2401 System Components USB-powered Hubs Self-powered HubsPower Adaptors Connecting Your OM-DAQ-USB-2401 Acquisition System to PC Direct Connection to Computer USB Ports Connecting Various Hardware SetupsConnections to Self-Powered and USB-powered Hubs Connection to USB-powered HubOM-DAQ-USB-2401 Mounting Connections to Self-Powered Hub and to USB-Powered HubOM-DAQ-USB-2400 Series OM-DAQ-USB-2401 Wall MountingOM-DAQ-USB-2401 Rail Mounting OM-DAQ-USB-2401 DIN Rail MountingSoftware Software InstallationGetting Started System RequirementsWelcome Screen Software SetupConfirm Installation Screen Main Control Window DAQ Central Software OperationToolbar Buttons Toolbar ButtonsFile Menu Main Control Window Pull-Down OperationsTools Menu Channels Tab 2 Device ConfigurationConfiguration Parameter Settings Manual Acquisition is manually started/stopped Level Data Displays Data Tab18. Main Window Screen 23. Waveform Screen Power Line Rejection Optical IsolationA/D Conversion Input Ranges Analog Input ConfigurationMeasurement Duration, Scan Time, and Resolution 27. Calibration/Scan Arrangement Automatic CalibrationThermocouple Measurements 28. Thermocouple WiringScan Time and Resolution Signal ManagementResolution Effective Number of Bits ENOB, RMS Channel Control and ExpansionRMS Under Sampling and AliasingExamples of Under Sampling SignalTriggering Signal ModesNoise Reduction in Differential Mode System Noise AveragingAnalog Filtering Crosstalk Input and Source ImpedanceVadc = VT x Ri / Rs + Ri = RCOM-DAQ-USB-2401 Design for CE Conformity CE ConformityFerrite Core Troubleshooting Basic ChecklistSymptoms and Solutions Service & Calibration Service & CalibrationSpecifications External Power Source Power SupplyThermocouple Input Range Cold JunctionTC Type Temp Typical Fast Slow Thermocouple Accuracy ºC for OM-DAQ-USB-2401International Usage & CE Marking Approvals and Regulatory Compliance10-2 10-3 10-4 WARRANTY/DISCLAIMER Temperature