Emerson AXP1406, AXP1600 manual Keying, SAM Physical Power Configuration

FRU Information and Sensor Data Records E-Keying

2.3.2E-Keying

The physical SAMs (IPMB 0xfc and 0xfe) each contain the following Point-to-Point Connectivity Record:

PICMG	Board Point-to-Point Connectivity Record (ID=0x14)
Version = 0
OEM GUID	Count	= 0
Link Descriptor:
Link	Grouping ID	= 0x00
Link	Type	= 0x01	PICMG®3.0 Base 10/100/1000 Base-T
Link	Type Extension	= 0x0 10/100/1000BASE-T Link (four-pair)
Link	Designator	= 0x101 Channel1/BaseInterface/Ports0
Link Descriptor:
Link	Grouping ID	= 0x00
Link	Type	= 0x01	PICMG®3.0 Base 10/100/1000 Base-T
Link	Type Extension	= 0x0 10/100/1000BASE-T Link (four-pair)
Link	Designator	= 0x102 Channel2/BaseInterface/Ports0

2.3.3Power Configuration

The following table describes the power configuration for the Physical SAM.

Table 2-2 SAM Physical Power Configuration

Item	Value	Meaning
Dynamic power reconfiguration	No	Possibility to change FRU power consumption without
support		switching it off, according to ATCA
Dynamic power configuration	No	Are the Power Draw levels fixed or these may vary if
		additional components are hot inserted or onboard
		components power consumption is changing
		dynamically
Number of Power Draw Levels	1	The amount of possible power levels, normally 1
Early Power Draw Levels, Watt	20	Complete early power consumption including IPMC
Steady state Power Draw Levels,	20	Complete steady power consumption including IPMC
Watt
Transition from Early to Steady	0	How long does board consumes early power. Early
levels, sec		power is normally bigger than steady

28 AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C)