Emerson AXP1600, AXP1406 manual Chassis Device Commands, Event Commands, PEF and Alerting Commands

Chassis Device Commands Supported IPMI Commands

1.2.4Chassis Device Commands

The IPMC supports the following chassis device commands.

Table 1-4 Supported Chassis Device Commands

	NetFn		Active	Physical			ATCA
Command	Rq/Rs	CMD	ShelfMgr	ShelfMgr	PEMs	FTMs	Blades
Get Chassis Capabilities	0x00/0x01	0x00	X	X
Get Chassis Status	0x00/0x01	0x01	X	X
Chassis Control	0x00/0x01	0x02	X	X
Set Chassis Capabilities	0x00/0x01	0x05	X	X
Set System Boot Options*	0x00/0x01	0x08					X
Get System Boot Options*	0x00/0x01	0x09					X

*The data portion of these commands are blade-specific. Refer to the respective blade specification.

1.2.5Event Commands

The IPMC supports the following event commands.

Table 1-5 Supported Event Commands

			Active	Physical			ATCA
Command	NetFn Rq/Rs	CMD	ShelfMgr	ShelfMgr	PEMs	FTMs	Blades
Set Event Receiver	0x04/0x05	0x00	X	X	X	X	X
Get Event Receiver	0x04/0x05	0x01	X	X	X	X	X
Platform Event (a.k.a. “Event	0x04/0x05	0x02	X	X			*
Message”)

*ATCA-F101 supports this command.

1.2.6PEF and Alerting Commands

The IPMC supports the following PEF and alerting commands.

Table 1-6 Supported PEF and Alerting Commands

	NetFn		Active	Physical			ATCA
Command	Rq/Rs	CMD	ShelfMgr	ShelfMgr	PEMs	FTMs	Blades
Get PEF Capabilities	0x04/0x05	0x10	X	X
Arm PEF Postpone Timer	0x04/0x05	0x11	X	X
Set PEF Configuration Parameters	0x04/0x05	0x12	X	X
Get PEF Configuration Parameters	0x04/0x05	0x13	X	X

AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C) 17