Emerson AXP1600, AXP1406 manual Sensor Overview

Sensor Overview FRU Information and Sensor Data Records

2.3.4Sensor Overview

The following table lists all IPMI sensors available on the physical SAM at IPMB addresses 0xFC and 0xFE. The information in this section supports the SAM on both the AXP1406 and AXP1600 shelves. The AXP1600 FRU and sensor data is highlighted and marked for ease of use.

Table 2-3 Sensor Overview

Sensor		Type of	What does it	Sensor
No.	Sensor Name	Measurement	measure?	Type	Availability
0	FRU 0 HOT_SWAP	Status	State of FRU	Discrete	Always
1	IPMB LINK	Status	State of IPMB link	Discrete	Always
2	Vbat	Voltage		Analog	Always
3	Vcc 3.3 V voltage	Voltage		Analog	Always
4	+12 V voltage	Voltage		Analog	Always
5	+1.8 V	Voltage		Analog	Always
6	MAX6656 INT @1A	Temperature		Analog	Always
7	MAX6656 EXT1 @1A	Temperature		Analog	Always
8	MAX6656 EXT2 @1A	Temperature		Analog	Always
9	PEM A	Status	PEM A Presence	Discrete	Always
10	PEM B	Status	PEM B Presence	Discrete	Always
11	NSC A1	Status	NSC Board	Discrete	Always
			Presence
12	NSC B1	Status	NSC Board	Discrete	Always
			Presence
13	AXP Backplane ID	OEM	Backplane Bus	Discrete	Always
			Type
14	12 V In B Valid	Status	Power Unit	Discrete	Always
15	12 V In A Valid	Status	Power Unit	Discrete	Always
16	Fault Event	OEM	Shelf Manager	Discrete	Always
			Rebooting Notifier
17	POST Results	Status	Management	Discrete	Always
			Subsystem Health
18	Shelf FRU Info	OEM	Shelf Fru Info	Discrete	Always
			Validity
128	CPLD State	OEM	Master and	Discrete	Always
			Backup Shelf
			Manager State

1. These are additional sensors on the SAM1000 for the AXP1600.

AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C) 29