Emerson AXP1406, AXP1600 manual FRU State Management, Led

System Behavior in Response to Sensor Events FRU State Management

A.5 FRU State Management

The following table provides the SAM action, FRU status, hot swap state for each FRU temperature sensor in the shelf.

Table A-1 FRU State Table for Nonrecoverable Threshold Events from Temperature Sensors

FRU	Temperature Sensor	SAM Action		FRU Status
					Hot Swap
		Step-1	Step-2	Operation	State	H/S LED
Active	Sensor # 6("MAX6656 INT	Set all FAN-		H/S LED	M6->M1	Turn ON
SAM	@1A")	module speed		ON. Still	(Logical
	Sensor # 7("MAX6656 EXT1	MAX		working as	SAM
	@1A")			Active.	(0x20) will
	Sensor # 8("MAX6656 EXT2				show M4
	@1A")				state)
Standby	Sensor # 6("MAX6656 INT	Set all FAN-		H/S LED	M6->M1	Turn ON
SAM	@1A")	module speed		ON.
	Sensor # 7("MAX6656 EXT1	MAX
	@1A")
	Sensor # 8("MAX6656 EXT2
	@1A")
PEM	Sensor # 12 ("DS75 Temp")	Set all FAN-	Issue	Still working.	M6 > M1	Turn ON
		module speed	"deactivate"
		MAX	command to
			PEM
ATCA-	Sensor # 8 ("Inlet Temp")	Set all FAN-	Issue	Payload	M6 > M1	Turn ON
F101		module speed	"deactivate"	powered
		MAX	command to	down by the
			F101	SAM.
	Sensor # 9 ("Outlet Temp")	Set all FAN-	Issue	Payload	M6 > M1	Turn ON
		module speed	"deactivate"	powered
		MAX	command to	down by the
			F101	SAM.
	Sensor # 10 ("PMC Temp")	Set all FAN-	Issue	Payload	M6 > M1	Turn ON
		module speed	"deactivate"	powered
		MAX	command to	down by the
			F101	SAM.
	Sensor # 20 ("Artesyn Temp")	Set all FAN-	Issue	Payload	M6 > M1	Turn ON
		module speed	"deactivate"	powered
		MAX	command to	down by the
			F101	SAM.

144 AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C)