Omron Healthcare VARISPEEDF7 specifications EN-2

Page 3

Warnings

CAUTION

Cables must not be connected or disconnected, nor signal tests carried out,

while the power is switched on.

The Varispeed F7 DC bus capacitor remains charged even after the power has been switched off. To avoid an electric shock hazard, disconnect the frequency inverter from the mains before carrying out maintenance. Then wait for at least 5 minutes after all LEDs have gone out.

Do not perform a withstand voltage test on any part of the Varispeed. The frequency inverter contains semiconductors, which are not designed for such high voltages.

Do not remove the digital operator while the mains supply is switched on. The printed cir- cuit board must also not be touched while the inverter is connected to the power.

Never connect general LC/RC interference suppression filters, capacitors or overvoltage protection devices to the inverter input or output.

To avoid unnecessary overcurrent faults, etc. being displayed, the signaling contacts of any contactor or switch fitted between inverter and motor must be integrated into the inverter control logic (e.g. baseblock).

This is absolutely imperative!

This manual must be read thoroughly before connecting and operating the inverter. All safety precautions and instructions for use must be followed.

The inverter may must be operated with the appropriate line filters, following the installation instructions in this manual and with all covers closed and terminals covered.

Only then will adequate protection be provided. Please do not connect or operate any equipment with visible damage or missing parts. The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warnings in this manual.

EN-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents VARISPEED F7 F7Z Quick Start Guide Table of Contents EN-2 EN-3 ‹ Safety Precautions and Instructions„ Notes EN-4‹ EMC Compatibility „ Electrical ConnectionEN-5 „ Laying CablesEarthing the cable shield with metal clips „ Unpacking the Inverter ‹ Mechanical Installation„ Checking the Installation Site EN-6„ Installation Orientation „ Installation of Inverters and EMC filtersEN-7 ‹ Electrical Connection „Wiring the Inverter Wiring DiagramEN-8 EN-9 „Main Circuit Terminals„Control Circuit Terminals EN-10 During run no Closed during Run FunctionFlywheel Diode Connection EN-11 „ Sinking/Sourcing Mode NPN/PNP SelectionSinking / Sourcing Mode and Input Signals External Power Source Sinking Mode NPN‹ Wiring Main Circuit Inputs EN-12Input Fuse Selection EN-13 „Wiring the Output Side of the Main Circuit„Control Circuit Wiring Precautions Ground WiringEN-14 ‹ Digital Operator Display optional„Digital Operator Keys EN-15 ‹ Start Up Procedure„ Setting the Autotuning Mode ‹ Before Power Up‹ Display after Power Up ‹ AutotuningEN-17 „Other Alarms and Faults During AutotuningEN-18 User ParameterVbase EN-19Fmax VmaxLimit only OLV and CLV EN-20EN-21 ‹ General Faults and AlarmsOL2 EN-22OH1 OL1EN-23 ‹ Operator Programming Errors‹ Autotuning Faults EN-24OPE08

VARISPEEDF7 specifications

The Omron Healthcare VARISPEEDF7 is an innovative and advanced medical device designed to provide effective therapy for various health conditions. This cutting-edge device is part of Omron’s commitment to enhancing healthcare solutions and promoting patient well-being through technology. The VARISPEEDF7 is particularly notable for its versatility and effectiveness in various therapeutic applications.

One of the main features of the VARISPEEDF7 is its adjustable speed settings. This allows healthcare professionals to customize the therapy according to the specific needs of each patient. The ability to vary speed enhances treatment effectiveness, as different conditions may require different intensities. The device is designed to accommodate a wide range of therapeutic needs, making it a valuable tool in clinical and home healthcare settings alike.

The VARISPEEDF7 integrates several advanced technologies, including its proprietary motor control system. This system provides smooth and consistent operation, minimizing disruptions during therapy sessions. The technology ensures precise speed control, enabling healthcare providers to maintain optimal conditions for therapy.

In addition to its speed control, the VARISPEEDF7 is equipped with a user-friendly interface. The display provides clear information about settings and progress, making it easy for both healthcare professionals and patients to monitor treatment sessions. The intuitive design reduces the learning curve and enhances the overall user experience.

Another significant characteristic of the VARISPEEDF7 is its portability. The compact design allows for easy transport and storage, making it ideal for patients who require therapy at home or on the go. This feature is particularly beneficial for individuals with mobility issues or those who enjoy an active lifestyle.

Durability is also a hallmark of the VARISPEEDF7. It is built with high-quality materials that ensure longevity and reliability, even with frequent use. This commitment to durability highlights Omron’s dedication to providing healthcare solutions that practitioners and patients can trust.

In summary, the Omron Healthcare VARISPEEDF7 represents a significant advancement in therapeutic technology. With its adjustable speed settings, advanced motor control system, user-friendly interface, portability, and durability, the VARISPEEDF7 is designed to meet the diverse needs of patients and healthcare providers. It stands out as a versatile solution that enhances patient care and promotes effective treatment outcomes. As healthcare continues to evolve, the VARISPEEDF7 exemplifies how innovative technologies can make a substantial impact on health and well-being.
Top Page Image Contents