Omron Healthcare VARISPEEDF7 EN-6, ‹ Mechanical Installation, „ Unpacking the Inverter, Method

Page 7

Installation

‹ Mechanical Installation

„Unpacking the Inverter

Check the following items after unpacking the inverter.

Item

Method

Has the correct Inverter model been

Check the model number on the nameplate on the side of the

delivered?

Inverter.

 

 

Is the Inverter damaged in any way?

Inspect the entire exterior of the Inverter to see if there are any

scratches or other damage resulting from shipping.

 

 

 

Are any screws or other components

Use a screwdriver or other tools to check for tightness.

loose?

 

 

 

If any irregularities in the above items are found, contact the agency from which the Inverter was pur- chased or your Omron Yaskawa Motion Control representative immediately.

„Checking the Installation Site

Protection covers are attached to the top and bottom of the NEMA 1 / IP20 Inverters. Be sure to remove the top cover before operating a 200 or 400 V Class Inverter with a capacity of 18.5 kW or less inside a panel.

Observe the following precautions when mounting the Inverter:

•Install the Inverter in a clean location which is free from oil mist and dust. It can be installed in a totally enclosed panel that is completely shielded from floating dust.

•When installing or operating the Inverter, always take special care so that metal powder, oil, water, or other foreign matter does enter the Inverter.

•Do not install the Inverter on combustible material, such as wood.

•Install the Inverter in a location free from radioactive materials and combustible materials.

•Install the Inverter in a location free from harmful gasses and liquids.

•Install the Inverter in a location without excessive oscillation.

•Install the Inverter in a location free from chlorides.

•Install the Inverter in a location without direct sunlight.

EN-6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VARISPEED F7 F7Z Quick Start Guide Table of Contents EN-2 EN-3 ‹ Safety Precautions and Instructions„ Notes EN-4‹ EMC Compatibility „ Electrical Connection„ Laying Cables EN-5Earthing the cable shield with metal clips „ Unpacking the Inverter ‹ Mechanical Installation„ Checking the Installation Site EN-6„ Installation of Inverters and EMC filters „ Installation OrientationEN-7 Wiring Diagram ‹ Electrical Connection „Wiring the InverterEN-8 „Main Circuit Terminals EN-9„Control Circuit Terminals During run no Closed during Run Function EN-10Flywheel Diode Connection EN-11 „ Sinking/Sourcing Mode NPN/PNP SelectionSinking / Sourcing Mode and Input Signals External Power Source Sinking Mode NPNEN-12 ‹ Wiring Main Circuit InputsInput Fuse Selection EN-13 „Wiring the Output Side of the Main Circuit„Control Circuit Wiring Precautions Ground Wiring‹ Digital Operator Display optional EN-14„Digital Operator Keys EN-15 ‹ Start Up Procedure„ Setting the Autotuning Mode ‹ Before Power Up‹ Display after Power Up ‹ AutotuningEN-17 „Other Alarms and Faults During AutotuningEN-18 User ParameterVbase EN-19Fmax VmaxLimit only OLV and CLV EN-20EN-21 ‹ General Faults and AlarmsOL2 EN-22OH1 OL1EN-23 ‹ Operator Programming ErrorsEN-24 ‹ Autotuning FaultsOPE08

VARISPEEDF7 specifications

The Omron Healthcare VARISPEEDF7 is an innovative and advanced medical device designed to provide effective therapy for various health conditions. This cutting-edge device is part of Omron’s commitment to enhancing healthcare solutions and promoting patient well-being through technology. The VARISPEEDF7 is particularly notable for its versatility and effectiveness in various therapeutic applications.

One of the main features of the VARISPEEDF7 is its adjustable speed settings. This allows healthcare professionals to customize the therapy according to the specific needs of each patient. The ability to vary speed enhances treatment effectiveness, as different conditions may require different intensities. The device is designed to accommodate a wide range of therapeutic needs, making it a valuable tool in clinical and home healthcare settings alike.

The VARISPEEDF7 integrates several advanced technologies, including its proprietary motor control system. This system provides smooth and consistent operation, minimizing disruptions during therapy sessions. The technology ensures precise speed control, enabling healthcare providers to maintain optimal conditions for therapy.

In addition to its speed control, the VARISPEEDF7 is equipped with a user-friendly interface. The display provides clear information about settings and progress, making it easy for both healthcare professionals and patients to monitor treatment sessions. The intuitive design reduces the learning curve and enhances the overall user experience.

Another significant characteristic of the VARISPEEDF7 is its portability. The compact design allows for easy transport and storage, making it ideal for patients who require therapy at home or on the go. This feature is particularly beneficial for individuals with mobility issues or those who enjoy an active lifestyle.

Durability is also a hallmark of the VARISPEEDF7. It is built with high-quality materials that ensure longevity and reliability, even with frequent use. This commitment to durability highlights Omron’s dedication to providing healthcare solutions that practitioners and patients can trust.

In summary, the Omron Healthcare VARISPEEDF7 represents a significant advancement in therapeutic technology. With its adjustable speed settings, advanced motor control system, user-friendly interface, portability, and durability, the VARISPEEDF7 is designed to meet the diverse needs of patients and healthcare providers. It stands out as a versatile solution that enhances patient care and promotes effective treatment outcomes. As healthcare continues to evolve, the VARISPEEDF7 exemplifies how innovative technologies can make a substantial impact on health and well-being.
Top Page Image Contents