Omega Speaker Systems HX93A, HX93DA RH/Temperature Transmitter, General Description, Unpacking

Page 5

HX93A, HX93DA SERIES

1

RH/Temperature Transmitter

1. General Description

The OMEGA® HX93A and HX93DA Series Relative Humidity/ Temperature Transmitter’s provide a linearized and temperature compensated output signal of 4 to 20 mA or 0 to 1 Vdc depending upon the model selected for both relative humidity and temperature measurement. The output signals have been calibrated and scaled 0 to 100% for Relative Humidity and –20 to 75ºC for temperature. A thin film polymer capacitor senses relative humidity while an 100 ohm RTD measures temperature, both are protected by a stainless steel filter that is easily removed for cleaning. The Nema rated polycarbonate enclosure and cable entry connection provides weathertight protection. Screws are provided for mounting via internal holes inside the enclosure. The HX93DA Series has dual built-in indicators for humidity and temperature.

2. Unpacking

Remove the packing list and verify that you have received all your equipment. If you have any questions about the shipment, please call our Customer Service Department at:

1-800-622-2378 or 203-359-1660. On the web you can find us at:

www.omega.com

e-mail: cservice@omega.com

When you receive the shipment, inspect the container and equipment for any signs of damage. Note any evidence of rough handling in transit. Immediately report any damage to the shipping agent.

NOTE

The carrier will not honor any damage claims unless all shipping material is saved for inspection. After examining and removing contents, save packing material and carton in the event reshipment is necessary.

The following items are supplied in the box with your HX93A transmitter.

This Manual, # M0933A (1 ea.)

#6 Wall Anchor and #6 Mounting Screw (2 ea.)

Dewpoint Card (1 ea.)

Additional Transmitter Models Available

Model

Description

HX92AC

Wall mount RH transmitter (4 to 20 mA Output)

HX92AV

Wall mount RH transmitter (0 to 1 Vdc Output)

HX92AC-D Duct mount RH transmitter (4 to 20 mA Output) HX92AV-D Duct mount RH transmitter (0 to 1 Vdc Output)

continued on next page

1

 

Image 5
Contents User’sGuide Servicing Europe Servicing North America For immediate technical or application assistance Section HX93A, HX93DA SeriesHX93A, HX93DA Series RM/Temperature TransmitterGeneral Description RH/Temperature TransmitterUnpacking Additional Transmitter Models Available DescriptionFor HX93A For HX93DA Example When using a 24 Vdc power supplyTheory of Operation Complimentary Instruments Recommended AccessoriesMounting Electrical Connections Current Transmitter Wiring ExamplesRelative Humidity Output Calculations Voltage Transmitter Wiring ExamplesRH Measured Vs Output Reading Temperature Output CalculationsFor Current output in ºC -20 to 75ºC Vdc ÷ .005848 4 = 81.5ºFRelative Humidity Adjustment Calibration Procedure for HX93AC all stylesCalibration Recommended equipmentHX93AC Calibration Procedure Temperature Adjustment Temperature AdjustmentHX93AV Calibration Procedure Relative Humidity Adjustment Calibration Procedure for HX93AV all stylesHX93AV Calibration Procedure Temperature Adjustment Relative Humidity Display Scaling Recommended equipment 15A. Display Scaling for HX93DAC all stylesFor ºC Display Temperature Display Scaling Recommended equipmentFor ºF Display Specifications MaintenanceTemperature Relative HumidityDimensions General SpecificationsWeight Wall Mount Model Duct Mount Model Sensor Type Ohm Platinum RTWARRANTY/DISCLAIMER Temperature