Omnitron Systems Technology 8000-0 user manual Access the NMM Remotely

Page 18

3.4.5Access the NMM Remotely

Remote access to the NMM is provided via SNMP, Telnet, FTP or an external serial modem connected to the Serial Console Port.

3.4.5.1Accessing the NMM via NetOutlook (SNMP)

The NMM can be remotely accessed by SNMP-client software such as Omnitron’s NetOutlook SNMP Management Software or third-party SNMP management software. See SNMP Preferences on how to configure the required parameters.

NetOutlook Chassis View and Trap Log Screens

3.4.5.2Accessing the NMM via Telnet

The NMM is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It is highly recommended that the network administrator set a new Telnet password in order to prevent unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control Preferences screen, option 6.

Page 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IConverter Network Management Module Table of Contents Overview Port Structure UTP Management Port B B B B B B B Out-of-Band Management Installation Procedure Passwords Management Options screen will be displayed Setting IP and Control Preferences Setting IP Parameters as Dhcp Client Setting NMM Passwords Setting Snmp Preferences Setting the Snmp Trap IP Host Addresses Vlan ID NMM Access the NMM Remotely Updating the NMM Firmware via the Serial Console Port Verify Operation Module Status NMMLED NMM Specifications Troubleshooting Guide Possible CausesWarranty Limitation of Warranty
Top Page Image Contents