Omega Vehicle Security PTC900 manual Dsp, RtC-d, RtC-t

DISPLAY SELECT (Level Active)

«

ª

When active (maintained action), the meter continuously scrolls through all displays that are not “locked-out” in the Display mode. (See Module 3 for Display Lock-out details.) A sub-menu provides Scrolling Speed selection.

«

ª

DISPLAY SELECT (Edge Triggered)

«

ª

When activated (momentary action), the meter advances to the next display that is not “locked-out” in the Display mode. (See Module 3 for Display Lock- out details.)

DISPLAY RESET (Level Active)

««

ªª

When active (maintained action), the meter continually resets only the currently shown display. If the RTC Time or Date is displayed, this function applies to the Outputs assigned to the RTC, and does not Reset the actual RTC Time or Date display. (See Module 6 for details on Output Assignment and Output Reset with Display Reset.)

DISPLAY RESET (Edge Triggered)

««

ªª

When activated (momentary action), the meter resets only the currently shown display. This is the factory setting for the Reset (RST) key. If the RTC Time or Date is displayed, this function applies to the Outputs assigned to the RTC, and does not Reset the actual RTC Time or Date display. (See Module 6 for details on Output Assignment and Output Reset with Display Reset.)

MAINTAINED RESET (Level Active)

««

ªª

When active (maintained action), the meter continually resets the displays

entered as in the sublist. The sublist appears when the PAR key is pressed. This function does not apply to the RTC Time or Date displays.

DISPLAY	DESCRIPTION	FACTORY
t-dSp	Timer	NO
C-dSP	Cycle Counter	NO

MOMENTARY RESET (Edge Triggered)

««

ªª

When activated (momentary action), the meter resets the displays entered as in the sublist. Function does not apply to RTC Time or Date displays.

DISPLAY	DESCRIPTION	FACTORY
t-dSp	Timer	NO
C-dSP	Cycle Counter	NO

DISPLAY HOLD (Level Active)

	«		«
ª		ª

When active (maintained action), the meter “freezes” the display values
entered as	in the sublist, while normal meter operation continues internally.

Program only one user input for this function.

DISPLAY	DESCRIPTION	FACTORY
t-dsp	Timer	NO
C-dsp	Cycle Counter	NO
rtC-d	RTC Date	NO
rtC-t	RTC Time	NO

	DISPLAY HOLD and RESET (Level Active Reset)
		«			«
ª			ª
When activated, the meter “freezes” the display values entered as				in the

sublist, before performing an internal Maintained Reset on the selected displays. This function does not apply to the RTC Time or Date displays.

		DISPLAY	DESCRIPTION	FACTORY
		t-dSp	Timer	NO
		C-dSP	Cycle Counter	NO
	DISPLAY HOLD and RESET (Edge Triggered Reset)
		«			«
ª				ª

When activated, the meter “freezes” the display values entered as in the

sublist, before performing an internal Momentary Reset on the selected displays. This function does not apply to the RTC Time or Date displays. Program only one user input for this function.

DISPLAY	DESCRIPTION	FACTORY
t-dSp	Timer	NO
C-dSP	Cycle Counter	NO

INHIBIT (Level Active)

««

ªª

When active (maintained action), timing and counting ceases for the displays

entered as in the sublist. The inhibit function is not a or

event in Setpoint programming. This function does not apply to RTC Time or Date displays. Program only one user input for this function.

	DISPLAY	DESCRIPTION	FACTORY
	t-dSp	Timer	NO
	C-dSP	Cycle Counter	NO
	CHANGE DIRECTION (Level Active)
	«			«
ª			ª

When active (maintained action), the timing or counting direction for the

display entered as	in the sublist, will be reversed from the direction set by
the Timing Direction (	) and/or Counting Direction (	) parameters in

Modules 1 and 4. (Program only one User Input per display for this function.) This function does not apply to RTC Time or Date displays.

DISPLAY	DESCRIPTION	FACTORY
t-dSp	Timer	NO
C-dSP	Cycle Counter	NO

14