Omega Vehicle Security PTC900 manual Module 9 Factory Service Operations, Display Intensity Level

Page 26

6.9 MODULE 9 - FACTORY SERVICE OPERATIONS (

)

PARAMETER MENU

 

E-&7 «

ª

DISPLAY INTENSITY LEVEL

Enter the desired Display Intensity Level (0-15) by using the arrow keys. The display will actively dim or brighten as the levels are changed. This parameter also appears in Quick Programming Mode when enabled.

RESTORE FACTORY DEFAULTS

 

 

«

 

Use the RST and/or arrow keys to display

and

 

press PAR. The meter will display

and then returns

ª

 

 

to

. Press DSP key to return to the Display Mode.

 

 

 

 

 

This will overwrite all programmed user settings with the

 

 

 

Factory Default Settings shown in the Parameter Value Chart. For the PTC901, the Time and Date stored in the Real-Time Clock, as well as the RTC Claibration Offset value, are NOT overwritten by this parameter. However, the Time and Date Display Formats will revert back to the Factory Default Settings.

TROUBLESHOOTING

 

For further assistance, contact technical support at the appropriate company numbers listed.

 

 

 

PROBLEM

 

REMEDIES

 

 

 

NO DISPLAY

 

CHECK: Power level, power connections

 

 

 

PROGRAMMING LOCKED-OUT

CHECK: User input set for program lock-out function is in Active state

ENTER: Security code requested

 

 

CERTAIN DISPLAYS ARE LOCKED-OUT

CHECK: Display Lock-out programming in Module 3

 

 

 

MODULES or PARAMETERS NOT ACCESSIBLE

CHECK: Corresponding plug-in card installation, Program Lock-out/ Value Access

parameter programming in Module 3

 

 

 

 

 

TIMER NOT RUNNING

CHECK: Input wiring, Timer plug jumper setting, Timer input programming in Module 1,

input signal level, Timer Inhibited by Input B or a user input

 

 

 

 

 

USER INPUT NOT WORKING PROPERLY

CHECK: User input wiring, user input plug jumper setting, user input signal level,

user input programming in Module 2

 

 

 

 

OUTPUTS NOT WORKING PROPERLY

CHECK: Setpoint plug-in card installation, wiring, Setpoint programming in Module 6

 

 

 

REAL-TIME CLOCK NOT WORKING PROPERLY

CHECK: RTC plug-in card installation, RTC programming in Module 8, check for

proper battery installation, replace battery. DO NOT ADJUST TRIM CAP ON RTC CARD!

 

 

SERIAL COMMUNICATIONS NOT WORKING

CHECK: Serial plug-in card installation, Serial wiring, Serial settings in Module 7,

host settings

 

 

 

 

 

ERROR CODE (

)

PRESS: Reset key (If unable to clear, contact factory.)

 

 

 

Shaded areas are model dependent.

26

Image 26
Contents User’s Guide Servicing North America Safety Summary General DescriptionTable of Contents General Meter SpecificationsSetpoint Cards LDP6-CDS Optional PLUG-IN Cards and AccessoriesCommunication Cards LDP6-CDC Indicates factory setting Installing the MeterSetting the Jumpers To Install Installing PLUG-IN CardsWiring the Meter TOP ViewSourcing Logic AC Power DC PowerSinking Logic Sinking Output Logic Card Setpoint PLUG-IN Card TerminalsSourcing Output Logic Card RS232 CommunicationsTime synchronization between multiple Meter automatically adjusts the minutesReviewing the Front Buttons and Display With the HostProgramming the Meter Programming MenuModule 1 Timer Input Parameters Parameter MenuModule 2 User Input and Front Panel Function KEY ParametersRtC-t DspRtC-d SP-3 SP-1SP-2 SP-4Module 3 Display and Program LOCK-OUT Parameters DLYINt Module 5 Timer Operating ModesModule 4 Cycle Counter Parameters INt-LINP OP OUt Module 6 S Etpoint a Larm P ArametersLAtCH « toOutput Reset with Display Reset Timer StopTIMER/COUNTER Auto Reset Setpoint POWER-UP StateStrStp Module 7 Serial Communications ParametersSPNt Register Identification Chart Command ChartCommand String Construction Command String ExamplesMeter Response Examples Auto/Manual Mode Register MMR ID UAbbreviated Transmission Setpoint Output Register SOR IDSET DAY Module 8 REAL-TIME Clock ParametersSET Time SET Date 12-59p +B/Problem Remedies Module 9 Factory Service OperationsRestore Factory Defaults Press DSP key to return to the Display ModeSp0f-4 Sp0f-2Sp0f-3 USEr-2ACt-n SP-1 SP-2 SP-3 SP-4ASM-n OUt-nPTC900/PTC901 Programming Quick Overview Accessories Part Number InformationWARRANTY/DISCLAIMER Shop online at omega.com

PTC900 specifications

The Omega Vehicle Security PTC900 is a sophisticated vehicle security system designed to provide comprehensive protection against theft and unauthorized access. This cutting-edge technology integrates advanced features and a robust design to ensure peace of mind for vehicle owners.

One of the standout characteristics of the PTC900 is its state-of-the-art immobilizer technology. The system incorporates a unique electronic key code that prevents the engine from starting unless the authorized key is present. This feature significantly deters potential thieves, making it exceedingly difficult to operate the vehicle without the proper authorization.

The PTC900 is equipped with a dual-stage shock sensor that detects both minor and significant impacts. When a disturbance is detected, the system emits a loud alarm, drawing attention and potentially scaring off intruders. This sensor capability allows for a tailored response to various threats, enhancing security without unnecessary disruptions from harmless movements.

Additionally, the Omega Vehicle Security system includes a remote keyless entry feature, allowing users to lock and unlock their vehicles from a distance conveniently. This technology not only provides ease of use but also reinforces the security system by eliminating the need for traditional keys that can be copied or misused.

Another remarkable aspect of the PTC900 is its user-friendly interface. The intuitive control panel enables quick adjustments and customizations to various security settings, allowing users to tailor the system to their specific needs. With clear indicators for system status, users can easily monitor their vehicle’s security at a glance.

The reliability of the Omega Vehicle Security system is further enhanced by its weather-resistant construction, ensuring durability under various environmental conditions. The compact design allows for seamless integration into different vehicle types without compromising aesthetics or functionality.

For those seeking enhanced peace of mind, the PTC900 also offers optional GPS tracking capabilities. This feature enables vehicle owners to monitor their vehicle's location in real time, providing an additional layer of security against theft. If the vehicle is stolen, owners can quickly share location data with law enforcement, increasing the likelihood of recovery.

In conclusion, the Omega Vehicle Security PTC900 stands out as a premium solution in vehicle protection. With its advanced immobilizer technology, dual-stage shock sensor, remote keyless entry, user-friendly features, and optional GPS tracking, it provides comprehensive security, ensuring that vehicle owners can enjoy their investments without fear.