Omega Vehicle Security PTC900 Optional PLUG-IN Cards and Accessories, Setpoint Cards LDP6-CDS

Page 5

OPTIONAL PLUG-IN CARDS AND ACCESSORIES

WARNING: Disconnect all power to the unit before installing Plug-in cards.

Adding Option Cards

The PTC900/PTC/901 series meters can be fitted with up to three optional plug-in cards. The details for each plug-in card can be reviewed in the specification section below. Only one card from each function type can be installed at one time. The function types include Setpoint Alarms (LDP6-CDS), Communications (LDP6-CDC), and Real-Time Clock Card (LDP6-RTC). The plug-in cards can be installed initially or at a later date.

COMMUNICATION CARDS (LDP6-CDC)

A variety of communication protocols are available for the PTC900/PTC/901 series. Only one of these cards can be installed at a time. When programming the unit via the Windows® based software program, the RS232 or RS485 Cards must be used.

LDP6-CDC10 - RS485 Serial (Terminal) LDP6-CDC1C - RS485 (Connector) LDP6-CDC20 - RS232 Serial (Terminal) LDP6-CDC2C - RS232 (Connector)

LDP6-CDC40 - Modbus (Terminal)

LDP6-CDC4C - Modbus (Connector)

SERIAL COMMUNICATIONS CARD Type: RS485 or RS232

Isolation To Sensor & User Input Commons: 500 Vrms for 1 min.

Working Voltage: 50 V. Not Isolated from all other commons. Data: 7/8 bits

Baud: 300 to 19,200

Parity: No, Odd or Even

Bus Address: Selectable 0 to 99, Max. 32 meters per line (RS485)

Transmit Delay: Selectable for 2 to 50 msec or 50 to 100 msec (RS485)

MODBUS CARD

Type: RS485; RTU and ASCII MODBUS modes

Isolation To Sensor & User Input Commons: 500 Vrms for 1 minute. Working Voltage: 50 V. Not isolated from all other commons.

Baud Rates: 300 to 38,400.

Data: 7/8 bits

Parity: No, Odd, or Even

Addresses: 1 to 247.

Transmit Delay: Programmable; See Transmit Delay explanation.

PROGRAMMING SOFTWARE

DP6-SOFT is a Windows® based program that allows configuration of the PTC900/PTC/901 meters from a PC. This software offers standard drop-down menu commands, that make it easy to program the meter. The PTC900/PTC/901 program can then be saved in a PC file for future use. A serial plug-in card is required to program the meter using the software.

SETPOINT CARDS (LDP6-CDS)

The PTC900/PTC/901 series has 4 available setpoint alarm output plug-in cards. Only one of these cards can be installed at a time. (Logic state of the outputs can be reversed in the programming.) These plug-in cards include:

LDP6-CDS10 - Dual Relay, FORM-C, Normally open & closed LDP6-CDS20 - Quad Relay, FORM-A, Normally open only LDP6-CDS30 - Isolated quad sinking NPN open collector LDP6-CDS40 - Isolated quad sourcing PNP open collector

DUAL RELAY CARD

Type: Two FORM-C relays

Isolation To Timer & User Input Commons: 2300 Vrms for 1 min. Working Voltage: 240 Vrms

Contact Rating:

One Relay Energized: 5 amps @ 120/240 VAC or 28 VDC (resistive load), 1/8 HP @120 VAC, inductive load

Total current with both relays energized not to exceed 5 amps

Life Expectancy: 100 K cycles min. at full load rating. External RC snubber extends relay life for operation with inductive loads

Response Time: 5 msec. nominal with 3 msec. nominal release

Timed Output Accuracy: ±0.01% -10 msec.

QUAD RELAY CARD

Type: Four FORM-A relays

Isolation To Timer & User Input Commons: 2300 Vrms for 1 min. Working Voltage: 250 Vrms

Contact Rating:

One Relay Energized: 3 amps @ 250 VAC or 30 VDC (resistive load), 1/10 HP @ 120 VAC, inductive load

Total current with all four relays energized not to exceed 4 amps

Life Expectancy: 100K cycles min. at full load rating. External RC snubber extends relay life for operation with inductive loads

Response Time: 5 msec. nominal with 3 msec. nominal release

Timed Output Accuracy: ±0.01% -10 msec.

QUAD SINKING OPEN COLLECTOR CARD Type: Four isolated sinking NPN transistors.

Isolation To Timer & User Input Commons: 500 Vrms for 1 min. Working Voltage: 50 V. Not Isolated from all other commons.

Rating: 100 mA max @ VSAT = 0.7 V max. VMAX = 30 V

Response Time: 400 µsec. nominal with 2 msec. nominal turnoff

Timed Output Accuracy: ±0.01% -10 msec.

QUAD SOURCING OPEN COLLECTOR CARD Type: Four isolated sourcing PNP transistors.

Isolation To Timer & User Input Commons: 500 Vrms for 1 min. Working Voltage: 50 V. Not Isolated from all other commons.

Rating: Internal supply: 24 VDC ± 10% , 30 mA max. total External supply: 30 VDC max., 100 mA max. each output

Response Time: 400 µsec. nominal with 2 msec. nominal turnoff

Timed Output Accuracy: ±0.01% -10 msec.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User’s Guide Servicing North America General Description Safety SummaryGeneral Meter Specifications Table of ContentsSetpoint Cards LDP6-CDS Optional PLUG-IN Cards and AccessoriesCommunication Cards LDP6-CDC Indicates factory setting Installing the MeterSetting the Jumpers Wiring the Meter Installing PLUG-IN CardsTo Install TOP ViewSourcing Logic AC Power DC PowerSinking Logic Sourcing Output Logic Card Setpoint PLUG-IN Card TerminalsSinking Output Logic Card RS232 CommunicationsReviewing the Front Buttons and Display Meter automatically adjusts the minutesTime synchronization between multiple With the HostProgramming Menu Programming the MeterParameter Menu Module 1 Timer Input ParametersParameters Module 2 User Input and Front Panel Function KEYRtC-t DspRtC-d SP-2 SP-1SP-3 SP-4Module 3 Display and Program LOCK-OUT Parameters Module 4 Cycle Counter Parameters Module 5 Timer Operating ModesDLYINt INt-LINP OP LAtCH Module 6 S Etpoint a Larm P ArametersOUt « toTIMER/COUNTER Auto Reset Timer StopOutput Reset with Display Reset Setpoint POWER-UP StateStrStp Module 7 Serial Communications ParametersSPNt Command String Construction Command ChartRegister Identification Chart Command String ExamplesAbbreviated Transmission Auto/Manual Mode Register MMR ID UMeter Response Examples Setpoint Output Register SOR IDSET DAY Module 8 REAL-TIME Clock ParametersSET Time SET Date +B/ 12-59pRestore Factory Defaults Module 9 Factory Service OperationsProblem Remedies Press DSP key to return to the Display ModeSp0f-3 Sp0f-2Sp0f-4 USEr-2ASM-n SP-1 SP-2 SP-3 SP-4ACt-n OUt-nPTC900/PTC901 Programming Quick Overview Part Number Information AccessoriesWARRANTY/DISCLAIMER Shop online at omega.com

PTC900 specifications

The Omega Vehicle Security PTC900 is a sophisticated vehicle security system designed to provide comprehensive protection against theft and unauthorized access. This cutting-edge technology integrates advanced features and a robust design to ensure peace of mind for vehicle owners.

One of the standout characteristics of the PTC900 is its state-of-the-art immobilizer technology. The system incorporates a unique electronic key code that prevents the engine from starting unless the authorized key is present. This feature significantly deters potential thieves, making it exceedingly difficult to operate the vehicle without the proper authorization.

The PTC900 is equipped with a dual-stage shock sensor that detects both minor and significant impacts. When a disturbance is detected, the system emits a loud alarm, drawing attention and potentially scaring off intruders. This sensor capability allows for a tailored response to various threats, enhancing security without unnecessary disruptions from harmless movements.

Additionally, the Omega Vehicle Security system includes a remote keyless entry feature, allowing users to lock and unlock their vehicles from a distance conveniently. This technology not only provides ease of use but also reinforces the security system by eliminating the need for traditional keys that can be copied or misused.

Another remarkable aspect of the PTC900 is its user-friendly interface. The intuitive control panel enables quick adjustments and customizations to various security settings, allowing users to tailor the system to their specific needs. With clear indicators for system status, users can easily monitor their vehicle’s security at a glance.

The reliability of the Omega Vehicle Security system is further enhanced by its weather-resistant construction, ensuring durability under various environmental conditions. The compact design allows for seamless integration into different vehicle types without compromising aesthetics or functionality.

For those seeking enhanced peace of mind, the PTC900 also offers optional GPS tracking capabilities. This feature enables vehicle owners to monitor their vehicle's location in real time, providing an additional layer of security against theft. If the vehicle is stolen, owners can quickly share location data with law enforcement, increasing the likelihood of recovery.

In conclusion, the Omega Vehicle Security PTC900 stands out as a premium solution in vehicle protection. With its advanced immobilizer technology, dual-stage shock sensor, remote keyless entry, user-friendly features, and optional GPS tracking, it provides comprehensive security, ensuring that vehicle owners can enjoy their investments without fear.
Top Page Image Contents