NETGEAR WMS105-10000S user manual Reset, Snmp

Page 31

ProSafe 5 AP Wireless Management Software WMS105

Reset

The Reset screen lets you reboot managed access points.

1.On the Maintenance tab select Reset > Access Points > Reboot:

2.Select the Yes radio button.

3.Click Apply to reboot the access points.

SNMP

You can use SNMP for the Wireless Management Software. Enable SNMP to allow the SNMP network management software, such as HP OpenView, to monitor the Wireless Management Software by using SNMPv1/v2 protocol.

On the Maintenance tab, select Remote Management > System > SNMP:

•SNMP checkbox: Enable SNMP for the Wireless Management Software.

•Read-Only Community Name: The community string to allow the SNMP manager to read the WMS105 MIB objects.

•Read-Write Community Name: The community string to allow the SNMP manager to read and write the WMS105 MIB objects.

•Trap Community Name: The community name which is associated with the IP address to Receive Traps.

•IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from the Wireless Management Software.

Chapter 6: Maintenance 31

Image 31

Contents ProSafe 5 AP Wireless Management Software WMS105 Technical Support NETGEAR, Inc Table of Contents Index Getting Started Installing the SoftwareGeneral Settings System SettingsLogging Time Settings Syslog Settings Auto Discovery Access Point DiscoveryTo use Auto Discovery IP DiscoveryTo use IP Discovery Discovery ResultsAdding Access Points Configuring Centralized RF Management Wireless ConfigurationProSafe 5 AP Wireless Management Software WMS105 To manually specify the Wlan parameters for access points Advanced Wireless SettingsSend packet before sending the actual packet data QoS for Managed Access Points Configuring QoSTo specify QoS settings Security Profiles List Security ConfigurationTo view or change security profiles Editing a Security Profile Network Authentication and Data Encryption Rogue Access PointsMAC Authentication To set up MAC Authentication To configure Radius Server Settings Radius Server SettingsTo set up guest access Configuring Guest AccessMonitoring Access Point SummarySummary Access Point Status Wireless StationsProfile Information Access Point Status DetailsClient Status Monitoring Rogue Access PointsProSafe 5 AP Wireless Management Software WMS105 Changing Passwords MaintenanceTo change the password Snmp ResetRemote Management Upgrading Access Point FirmwareTo upgrade the access point software To restore settings from a backup file Backing up Configuration SettingsRestoring Settings from a File To back up the Wireless Management Software settingsTo download logs Downloading Wireless Management Software LogsTo change the settings Using Discovery OUIAccess Point Supported Firmware Versions Access Point CompatibilitySSH Software Features and Access Point CompatibilityIndex Index