NETGEAR WMS105-10000S user manual Access Point Status Details, Profile Information

Page 27

ProSafe 5 AP Wireless Management Software WMS105

Access Point Status Details

From the Access Point Status screen, click the Details button to view this page.

You can use the Refresh button to update statistics and information.

The Access Point Status screen shows configuration settings, current wireless settings, current clients and current traffic statistics.

•Access Point Name: The access point’s NetBIOS name.

•Model: The managed access point’s model.

•Group: The configured group of managed access point.

•IP Address: The IP Address of managed access point.

•Ethernet MAC Address: The Ethernet MAC address of managed access point.

•2.4 GHz Channel: 2.4 GHz channel configured on access point; set to -NA- if not available.

•5 GHz Channel: 5 GHz channel configured on access point; set to -NA- if not available.

•Load Balancing: Load balancing enable/disable status for access point.

Profile Information

The section displays configured and enabled security profiles on the access point.

•Type: 802.11 b/bg/ng or 802.11 a/na mode for security profile.

•SSID: Wireless Network SSID.

•Security: The mode of security configured for the profile.

•VLAN: VLAN configured for the security profile.

Client Information

This section displays access point client station information.

•MAC: Wireless MAC of the access point client.

•SSID: Wireless SSID configured on the managed access point to which the client connects.

•Channel: The channel which client is using to connect.

•Mode: The mode (802.11 b/bg/ng or 802.11 a/na) for the security profile.

•Auth: The authentication mode (open, WEP, WPA, or WPA2) of security.

Chapter 5: Monitoring 27

Image 27

Contents ProSafe 5 AP Wireless Management Software WMS105 Technical Support NETGEAR, Inc Table of Contents Index Getting Started Installing the SoftwareSystem Settings General SettingsLogging Time Settings Syslog Settings Auto Discovery Access Point DiscoveryTo use Auto Discovery IP DiscoveryTo use IP Discovery Discovery ResultsAdding Access Points Configuring Centralized RF Management Wireless ConfigurationProSafe 5 AP Wireless Management Software WMS105 To manually specify the Wlan parameters for access points Advanced Wireless SettingsSend packet before sending the actual packet data Configuring QoS QoS for Managed Access PointsTo specify QoS settings Security Configuration Security Profiles ListTo view or change security profiles Editing a Security Profile Network Authentication and Data Encryption Rogue Access PointsMAC Authentication To set up MAC Authentication To configure Radius Server Settings Radius Server SettingsTo set up guest access Configuring Guest AccessAccess Point Summary MonitoringSummary Access Point Status Wireless StationsProfile Information Access Point Status DetailsClient Status Monitoring Rogue Access PointsProSafe 5 AP Wireless Management Software WMS105 Maintenance Changing PasswordsTo change the password Snmp ResetRemote Management Upgrading Access Point FirmwareTo upgrade the access point software To restore settings from a backup file Backing up Configuration SettingsRestoring Settings from a File To back up the Wireless Management Software settingsTo download logs Downloading Wireless Management Software LogsTo change the settings Using Discovery OUIAccess Point Supported Firmware Versions Access Point CompatibilitySSH Software Features and Access Point CompatibilityIndex Index