NETGEAR WMS105-10000S user manual Downloading Wireless Management Software Logs, To download logs

ProSafe 5 AP Wireless Management Software WMS105

Downloading Wireless Management Software Logs

Maintenance logs allow backup of the logs collected on the Wireless Management Software. In the event of a problem or failure, these logs along with backed up configuration settings help developers determine the cause.

To download logs:

1.On the Maintenance Tab, select Logs.

2.Click Backup to create a backup file of the current logs.

3.If you do not have your browser set up to save downloaded files automatically, then locate where you want to save the file, rename it if you like.

If your browser is set up to save downloaded files automatically, the file will be saved to your browser’s download location on the hard disk

4.Click Backup.

Diagnostic Ping Window

This window provides a way to verify ping connectivity from the Wireless Management Software to a managed access point. A managed access point can be selected from the Access Point drop-down list. The IP address of the access point to be pinged is displayed in the IP Address field.

1.Specify the number of pings to be tried in the Ping Count field.

2.Click Start to begin pinging the selected access point.

3.When you are finished, click Cancel to stop the pinging.

Chapter 6: Maintenance 35