NETGEAR WMS105-10000S user manual Remote Management, Upgrading Access Point Firmware

Page 32

ProSafe 5 AP Wireless Management Software WMS105

•Trap Port: The default port on which SNMP manager receives traps sent from the Wireless Management Software is 162.

•SNMP Manager IP: Restrict access to specified SNMP manager for doing SNMP v1/v2. Set this as 255.255.255.255 to allow any SNMP manager to access.

When you are finished making changes, click Apply to save your settings.

Remote Management

You can enable SSH or Telnet to remotely log in to the controller. From the Maintenance tab select Remote Management > System > Remote Console:

1.Select the radio button for SSH or Telnet:

•Secure Shell (SSH): If set to Enable, the Wireless Management Software allows remote access by using Secure Shell.

•Telnet: If set to Enable, the Wireless Management Software allows remote access by using Telnet.

2.Click Apply to save your settings.

Upgrading Access Point Firmware

You can install a new firmware for the access points using the Access Point Upgrade page.

WARNING!

In some cases, such as a major upgrade, you might need to erase the configuration of your access point after upgrading it.

See the Release Notes included with the software to find out if you need to reconfigure the access point. Reconfiguring access points already managed by the Wireless Management Software requires only the IP address to be set manually. The Wireless Management Software restores configuration for already managed access points running supported software version.

32 Chapter 6: Maintenance

Image 32

Contents ProSafe 5 AP Wireless Management Software WMS105 Technical Support NETGEAR, Inc Table of Contents Index Installing the Software Getting StartedLogging System SettingsGeneral Settings Time Settings Syslog Settings Access Point Discovery Auto DiscoveryIP Discovery To use Auto DiscoveryDiscovery Results To use IP DiscoveryAdding Access Points Wireless Configuration Configuring Centralized RF ManagementProSafe 5 AP Wireless Management Software WMS105 Advanced Wireless Settings To manually specify the Wlan parameters for access pointsSend packet before sending the actual packet data To specify QoS settings Configuring QoSQoS for Managed Access Points To view or change security profiles Security ConfigurationSecurity Profiles List Editing a Security Profile Rogue Access Points Network Authentication and Data EncryptionMAC Authentication To set up MAC Authentication Radius Server Settings To configure Radius Server SettingsConfiguring Guest Access To set up guest accessSummary Access Point SummaryMonitoring Wireless Stations Access Point StatusAccess Point Status Details Profile InformationMonitoring Rogue Access Points Client StatusProSafe 5 AP Wireless Management Software WMS105 To change the password MaintenanceChanging Passwords Reset SnmpUpgrading Access Point Firmware Remote ManagementTo upgrade the access point software Backing up Configuration Settings Restoring Settings from a FileTo back up the Wireless Management Software settings To restore settings from a backup fileDownloading Wireless Management Software Logs To download logsUsing Discovery OUI To change the settingsAccess Point Compatibility Access Point Supported Firmware VersionsSoftware Features and Access Point Compatibility SSHIndex Index