ProSafe 5 AP Wireless Management Software WMS105
Backing up Configuration Settings
Once you have the Wireless Management Software working properly, you should back up the information to have it available if something goes wrong. When you back up the settings, they are saved as a file on your computer.
To back up the Wireless Management Software settings:
1.On the Maintenance tab select Upgrade > Backup:
2.Click the Backup button to create a backup file of the current settings:
3.If you do not have your browser set up to save downloaded files automatically, then find a location where you want to save the file, and rename it if you like.
If your browser is set up to save downloaded files automatically, the file is saved to your browser’s download location on the hard disk
4.Click Backup.
Restoring Settings from a File
To restore settings from a backup file:
1.On the Maintenance tab select Upgrade > Restore Settings:
2.Click Browse.
3.Locate and select the previously saved backup file, then click Apply.
After restoring previous settings, the Wireless Management Software restarts. This takes about one minute.
WARNING!
Do not try to go online, turn off the Wireless Management Software, shut down the computer or do anything else until it finishes restarting! When the Test light turns off, wait a few more seconds before doing anything with the Wireless Management Software.
34 Chapter 6: Maintenance